BS0604A digital dual clamp phase voltmeter

BS0604A digital dual clamp phase voltmeter

BS0604A digital dual clamp phase voltmeter

Product Introduction

The BS0604A digital dual clamp phase volt ampere meter is another multifunctional instrument specially developed by our company for on-site testing. It has the characteristics of high precision, high stability, low power consumption, and easy use. It can directly measure AC voltage and AC current without opening the tested circuit, measure the phase between two voltages, two currents, and voltage and current, and indirectly measure the power factor and power of the circuit. It can distinguish the three-phase phase sequence, transformer wiring group, inductive and capacitive circuits, test the secondary circuit and bus differential protection system, read out the phase relationship between each CT group of differential protection, check the correctness of the wiring of the electricity meter, and inspect the line equipment; Adopting a large LCD display screen with words up to 40mm in height, and featuring a white screen backlight, the display is clear at a glance, showcasing an exquisite and luxurious appearance; Suitable for power, petrochemical, metallurgical, railway, meteorological, industrial and mining enterprises, scientific research institutions, metrology departments, etc.

Product Features

1. Exquisite structure, easy to use handheld structure, no need to disconnect the circuit or replace the limit when measuring phase in the current range of 10mA-10A and voltage range of 3V-500V. The display adopts a high contrast LCD screen with a word height of up to 25mm, and the screen angle can be freely converted to about 70 ° for the best visual effect. The switch function and layout are reasonable, and rotating the switch can read the measured voltage, current and phase.

2. High resolution: using the latest patented current clamp, with a current resolution of 0.1mA and a voltage resolution of 0.1V.

3. Low power consumption: This phase meter is designed with low power consumption and has battery voltage detection function.

4. Voltage endurance: The test shall be conducted for 1 minute to withstand a sine wave AC voltage of 1000V/50Hz between the voltage input terminal and the case, between the iron core of the clamp current transformer (current clamp) and the clamp handle, and between the two voltage input terminals to withstand a sine wave AC voltage of 500V/50Hz.

Note: Due to continuous product updates, the appearance of the product is subject to the actual product. Technical parameters and models are subject to change without prior notice, and our company reserves the right of interpretation; If there is any act of theft or copying, legal responsibility will be pursued.