BS0304 Vacuum Switch Vacuum Degree Tester

BS0304 Vacuum Switch Vacuum Degree Tester

BS0304 Vacuum Switch Vacuum Degree Tester

Product Introduction

The commonly used method to determine whether the vacuum degree of a vacuum tube has deteriorated is the power frequency withstand voltage method. This method can only determine the arc extinguishing chamber with severe vacuum degree deterioration. When the vacuum degree deteriorates to 10-1-10-1Pa, although the breakdown voltage has not decreased, the arc extinguishing chamber is no longer qualified; The vacuum switch vacuum degree tester adopts a new excitation coil and uses magnetic discharge method to test the vacuum degree of the arc extinguishing chamber without disassembling the arc extinguishing chamber. At the same time, a microcomputer is used for synchronous control and data acquisition processing, making the on-site testing sensitivity of the vacuum degree of the arc extinguishing chamber reach 10-5Pa. The most prominent feature of this instrument is the use of a new excitation coil and data processing method, which realizes the non disassembly measurement of vacuum degree. It is a practical detection instrument widely used in departments such as power, steel, petrochemical, textile, coal, railway, etc. that use vacuum switches.

Product Features

1. Quantitatively measure the vacuum degree inside the arc extinguishing chamber of various types of vacuum switches

2. No need to disassemble the vacuum switch during on-site measurement

3. Accurate and reliable test results

4. The operation is simpler and more convenient

5. Can save, print, and view test data.

6. Lightweight and easy to carry.


Note: Due to continuous product updates, the appearance of the product is subject to the actual product. Technical parameters and models are subject to change without prior notice, and our company reserves the right of interpretation; If there is any act of theft or copying, legal responsibility will be pursued.