Automatic rubber cutting machine

CP3000 CompactAutomatic rubber cutting machineProvides a convenient solution for preparing sheet-like and block shaped samples. The instrument is equipped with a two handed safety operating system, optional automatic knife sleeve, and feeding channel, which provides safety for the operator and meets safety standards.

CP 3000 Compact/CP 3000 Compact, with a cutting width of 285mm

CP3000 CompactAutomatic rubber cutting machineIt is currently a compact and widely used rubber cutting machine. This machine is designed specifically for small laboratory applications and is ideal for preparing pre cut polymer blocks and sheets for further sample preparation, such as using the M-VS 3000 volume sample cutting machine to cut Mooney test samples.

The CP 3000 compact machine is an ideal tool for small-scale and mixing experiments, in which case the rubber cutter is usually located near the feed inlet of the rubber mixing machine, so it is necessary to always provide an appropriate amount of polymer when needed.

Safe two handed control, side anti roll, transparent windows, and a closed CP 3000 top make it a safe laboratory rubber cutting machine on the market.

Like all other MonTech cutting machines, the CP 3000 series does not require hydraulic operation or power supply, has low operating costs, and is fundamentally impossible to contaminate materials.

Technical standards:

Operation: Max 12 cuts per minute, adjustable cutting and lifting speed

Cutting blade: Hardened and finely ground, replaceable PTFE cutting strip, pneumatic safe two handed operation (anti release), transparent safety protective covers on both sides of the machine and the front and back of the machine, optional safety covers for the blade and feeding channel.

Air source: Compressed air min 2 bar (recommended 5 bar), no electrical connection required!

Operation: Max 12 cuts per minute, adjustable cutting and lifting speed

Cut material width/cutting width: Max limit of 285mm

Cut material height/cutting height: Max limit of 148mm

Cutting pressure (adjustable) min: 0.3 tons @ 2.0 bar/max: 2.5 tons @ 10.0 bar

Cutting knife: hardening and precision grinding

Cutting strip: Teflon, replaceable

Material supply: Roller conveyor, total length 400mm

Safety equipment: Pneumatic safety dual hand operation (anti release), with transparent safety covers on both sides of the machine, as well as on the front and back of the machine. Safety covers for the blades and feeding channels are optional.

Required supplies: 2 compressed air bars (recommended 5 bars), no electrical connection required!

Dimensions (height x width x depth): 940x480x560mm

Weight: Approximately 120 kilograms net

Optional items: High speed version, which improves cutting speed; Various cutting block designs; Design different cutting widths and lengths of cut materials; Knife edge safety cover; Front conveyor; Front side safety cover with/without conveyor belt; Back feeding tunnel; Back safety cover; Heated cutting blade (ambient temperature+80 ° C); Cutting line laser; Set up a table or shopping cart; Rubber block lifting and loading/unloading system