Automatic dumbbell prototype manufacturer supply

Automatic dumbbell prototype manufacturer supplyIt controls the three coordinate milling cutter through a program, and the shape of the sample it produces is not limited. As long as the program is provided, various shapes can be madeShaped samples, such as bar shaped, dumbbell shaped, circular, various irregular shapes, etc., are different from traditional prototype machines that can only produce bar shaped and dumbbell shaped samples, and can only produce dumbbell shaped samples corresponding to templates. Secondly, its accuracy is very high, with a machining error of only 0.05mm for both cutting splines and milling dumbbells. Moreover, it is not limited by the shape of the specimen and can be machined as long as it can be clamped onto the platform. For example, dumbbell shaped specimens can be directly cut from a large plate, splines can be cut from any position on the plate, splines that do not meet size requirements can be milled, and irregular materials can be machined into flat plates.

When using this machine, if cutting simple rectangular non-standard splines, manual cutting can be used; If cutting dumbbell shaped splines or other standard splines, our company provides commonly used standard spline processing programs, which can be directly opened from the controller for processing; For users who need to process special shaped samples, our company can provide programming services.

This machine is equipped with a spindle motor cooling water pump, which automatically starts when the motor is working. Configure a sample water cooling device, which is supplied with water by a built-in water pump. The software can be used to select whether to turn on the cooling water during the processing. Equipped with a vacuum cleaner interface, the vacuum cleaner can automatically start after processing begins.

Automatic dumbbell prototype manufacturer supplyAdopting a brand new numerical control technology, the three-axis linkage system is controlled by a program controller to drive XYZ axis motors and supplemented by high-speed spindle motors to form a high-precision machining system, achieving‍The functions of spline cutting, dumbbell shaped sample milling, and impact notch milling for non-metallic plates, and the ability to mill non-metallic materials of any shape into plates and various samples. Complies with the national standard GB/T8804.2/3; GB/T1040; GB/T1041; GB/T528; Waiting for standards.