Ammonia nitrogen rapid detection kit

Have you encountered safety hazards such as cumbersome laboratory water quality testing operations, long testing times, inconvenient carrying of on-site and laboratory water quality testing reagents, and contact with water quality testing reagents? Excessive reliance on imported water quality testing reagents, high cost? FinkAmmonia nitrogen rapid detection kitBringing new green and safe detection reagents, providing you with fast, portable, accurate and other detection effects.

How to quickly and accurately detect the four important detection indicators of water quality (ammonia nitrogen, total phosphorus, COD, and total nitrogen) at low cost is the expectation of the water treatment industry. The testing concentration range of the rapid inspection package is: ammonia nitrogen 0-900mg/L (directly tested 0-9mg/L, diluted above 9mg/L to 0-9mg/L for retesting), which can be used for water quality ammonia nitrogen diagnostic testing in industries such as municipal, river, seawater, printing and dyeing, electroplating, papermaking, leather making, etc. The testing concentration range is: orthophosphate: 0-5mg/L, 5-500mg/L (0-5mg/L is tested directly, and if it exceeds 5mg/L, it is diluted to 0-5mg/L and tested again). Suitable for water quality diagnostic testing in industries such as municipal, river, garden, aquaculture, food processing, seafood processing, phosphate fertilizer chemical, electroplating, papermaking, printing and dyeing, leather making, etc., with results obtained within five minutes.

1. Easy to operate, fast, accurate, portable, and widely applicable.

2. Multiple tests have shown high cost-effectiveness.

3. The packaging is lightweight and practical, with an exquisite appearance.

4. Continuous improvement and iteration.

Fink ammonia nitrogen rapid detection kitThe oxidant used in the measurement method will change the reaction rate with changes in reaction time and temperature. Please pay attention to the color development time and water sample temperature when using it. About 5 minutes at 10 ℃, about 4 minutes at 20 ℃, and about 3 minutes at 30 ℃. As COD is a comprehensive indicator, the oxidants used in the product cannot act on all substances, so the detection results of the product are usually lower than those after digestion.