ATOS piston pump gear pump spot sales

ATOS piston pump gear pump spot sales

The advantages of choosing Shanghai are very clear:
The company has been established for 16 years, based in Shanghai and supplying imported products to the whole country.
2. Directly cooperate with foreign brand manufacturers and order first-hand products! (Currently established partnerships with thousands of foreign brand manufacturers!)
3. The company has its own customs clearance company! Shorten the transportation and customs clearance time, shorten the delivery time!
4 companies have professional product engineers in the industry, making it convenient to provide timely product technical solutions!
5. Each product provided is *, and imported products can provide customs declaration and proof of origin!! Fake one penalty ten!
6. We promise a one-year warranty for the supplied products. Full after-sales guarantee, tickets can be shipped together with the goods!

Atos gear pump is a rotary pump that relies on the change and movement of the working volume formed between the pump cylinder and the meshing gear to transport liquid or increase its pressure. Two enclosed spaces are composed of two gears, pump body, and front and rear covers. When the gears rotate, the volume of the space on the disengagement side of the gears increases from small to large, forming a vacuum that sucks in the liquid. The volume of the space on the meshing side of the Atos Atos gear pump gear decreases from large to small, and the liquid is squeezed into the pipeline. The suction chamber and the discharge chamber are separated by the meshing line of two gears.
working principle

The concept of atos gear pump is very simple, its basic form is two gears of the same size in a tightly fitting housing that interact with each other
Mesh rotation, the interior of this housing resembles an "8" shape, with two gears installed inside. The outer diameter and sides of the gears are tightly matched with the housing. The material from the extruder enters the space between two gears at the suction port and fills it. It moves along the shell with the rotation of the teeth and is discharged when the two teeth mesh.
Due to the continuous meshing of the teeth, this phenomenon occurs continuously, thus providing a continuous discharge at the pump outlet. The amount discharged is the same for each rotation of the pump. As the drive shaft rotates continuously, the atos pump also continuously discharges fluid. The flow rate of a pump is directly related to its rotational speed.
In fact, there is a small amount of fluid loss inside the pump because these fluids are used to lubricate the bearings and gears on both sides, and the pump body cannot fit without clearance, so it is impossible to discharge the fluid 100% from the outlet. Therefore, a small amount of fluid loss is inevitable, which makes the operating efficiency of the pump unable to reach 100%.
For fluids with changes in viscosity or density during the process, this atos pump will not be greatly affected. If there is a damper, such as placing a filter or a limiter on the discharge side, the pump will push the fluid through them.
There is actually a limit to the speed of a pump, which mainly depends on the process fluid. If oil is being transported, the pump can rotate at a high speed, but when the fluid is a high viscosity polymer melt, this limit will increase significantly.
Due to these limitations, the manufacturer of Atos gear pumps will offer a range of products in different specifications and displacements (the amount discharged per revolution). These pumps will be compatible with specific application processes.
The Atos Atos gear pump is equipped with heating elements that match the specifications of the pump and are available for users to choose from, ensuring fast heating and heat control. Unlike the heating method inside the pump, the damage to these components is limited to one board and is not related to the entire pump.

ATOS piston pump gear pump spot sales