ATOS gear pump Shanghai has sufficient stock of Vitareg in stock

ATOS gear pump Shanghai has sufficient stock of Vitareg in stock

When the ATOS gear pump is in operation, the automatic wheel rotates together with the electric motor and drives the driven wheel to rotate accordingly. When the meshing teeth on one side of the suction chamber gradually separate, the volume of the suction chamber increases, the pressure decreases, and the liquid in the suction pipe is sucked into the pump; The inhaled liquid is divided into two paths and pushed into the discharge chamber by the gear in the tooth groove. After the liquid enters the discharge chamber, due to the occasional meshing of the teeth of the two gears, the liquid is squeezed and enters the discharge pipe from the discharge chamber. The automatic gear and the driven gear constantly twist, allowing the pump to continuously suck in and discharge liquid.

On ATOS gear pumpIt is a rotary pump that relies on the change and movement of the working volume formed between the pump cylinder and the meshing gear to transport liquid or increase its pressure. It relies on the volume conversion of the meshing space of the gear teeth to ensure the delivery of liquid, and belongs to a reverse pump or a positive displacement pump. There are many varieties of gear pumps. According to the meshing method, it can be divided into external gear pumps and internal gear pumps; According to the tooth profile, it can be divided into spur gear pumps, helical gear pumps, and herringbone gear pumps. It has the characteristics of self-priming ability, independent flow rate and discharge pressure, and no suction valve or discharge valve on the pump casing. It has the features of simple structure, average flow rate, and reliable task.

There is a small amount of fluid loss inside the ATOS pump, which prevents the pump's operating efficiency from reaching 100%. This is because these fluids are used to lubricate the bearings and gears on both sides, and the pump body cannot fit seamlessly. Therefore, it is impossible to discharge the fluid 100% from the outlet, so a small amount of fluid loss is inevitable. However, the pump can still operate well and achieve an efficiency of 93% to 98% for most extruded materials.

PVPC-5073/1D plunger pump PVPC-5073/1D hydraulic plunger pump PVPC-5073/1D
PVPC-5073/1S10 hydraulic piston pump PVPC-5073/1S10
PVP-CH-5073/1D-IX24DC plunger pump PVP-CH-5073/1D-IX24DC hydraulic plunger pump PVP-C-CH-
5073/1D-IX24DC

ATOS-0016 E-MI-AC-01F-20/2 SN:0306A
ATOS-0017 OA/7NPT material number 41520600832
ATOS-0018 E-ATR-5/160
ATOS-0019 E-MI-AC-01F
ATOS-0020 RZGO-A-033/210
ATOS-0021 MAP-160
ATOS-0022 MAP-320

ATOS gear pumpThe gear and shaft of PEP-II pump are integrated, using a whole body quenching process, which can achieve a longer working life. The "D" type bearing combines a forced lubrication mechanism, allowing the polymer to pass through the bearing surface and return to the inlet side of the pump to ensure effective lubrication of the rotating shaft. This feature reduces the possibility of polymer retention and degradation. The precision machined pump body can ensure the precise fit between the "D" type bearing and the gear shaft, ensuring that the gear shaft is not eccentric and preventing gear wear. The Parkool sealing structure and PTFE lip seal together form a water-cooled seal. This seal does not actually touch the surface of the shaft, and its sealing principle is to cool the polymer to a semi molten state to form a self seal. Rheoseal sealing can also be used, which has reverse spiral grooves machined on the inner surface of the shaft seal to allow the polymer to be back pressed back to the inlet. For ease of installation, the manufacturer has designed a circular bolt mounting surface to match the flange installation of other equipment, making the manufacturing of cylindrical flanges easier.
ATOS gear pumpThe PEP-II gear pump is equipped with heating elements that match the specifications of the pump, which can be optionally selected by users to ensure rapid heating and heat control. Unlike the heating method inside the pump, the damage to these components is limited to one board and is not related to the entire pump.
The gear pump is driven by an independent motor, which can effectively block upstream pressure pulsation and flow fluctuations. The pressure pulsation at the outlet of the gear pump can be controlled within 1%. By using a gear pump on the extrusion production line, the flow output speed can be increased, the shear and residence time of materials in the extruder can be reduced, and the extrusion temperature and pressure pulsation can be lowered to improve productivity and product quality.ATOS-0023 KQ-012/53
ATOS-0024 PVPC-C-5073/1D-11
ATOS-0025 PVPC-C-3029
ATOS-0026 AGRLE-20PVP-CZ-5073/D12 plunger pump PVP-CZ-5073/D12 hydraulic plunger pump PVP-CZ-5073/D12
PVPC-LQZ-5073/1111 plunger pump PVPC-LQZ-5073/1111 hydraulic plunger pump PVPC-LQZ-5073/1111
PVPC-LW-4046/1D10 plunger pump PVPC-LW-4046/1D10 hydraulic plunger pump PVPC-LW-4046/1D10
PVPC-LZQZ-3029/1D plunger pump PVPC-LZQZ-3029/1D hydraulic plunger pump PVPC-LZQZ-3029/1D
PVPC-LZQZ-3029/1D/18 plunger pump PVPC-LZQZ-3029/1D/18 hydraulic plunger pump PVPC-LZQZ-3029/1D/18
PVPC-LZQZ-4046/1D plunger pump PVPC-LZQZ-4046/1D hydraulic plunger pump PVPC-LZQZ-4046/1D
PVPC-LZQZ-4046/1D/18 plunger pump PVPC-LZQZ-4046/1D/18 hydraulic plunger pump PVPC-LZQZ-4046/1D/18

ATOS gear pump Shanghai has sufficient stock of Vitareg in stock