AQ 500M Compressed Air Quality Testing - Portable Solution

AQ 500M Compressed Air Quality Testing - Portable Solution

According to ISO 8573, compressed air quality is tested for residual oil, particles, and residual humidity

Residual oil measurement - OIL CHECK 500

Long term and highly accurate measurement of oil vapor content ranging from 0.001 mg/m ³ to 5 mg/m ³. Due to the detection lower limit of 0.001 mg/m ³, it can monitor compressed air quality level 1 (ISO8573)

Particle counter PC 400

The high-precision optical particle counter PC 400 can measure particles as small as 0.1 µ m, making it suitable for monitoring Class 1 compressed air quality (ISO 8573).

DS 400- Graphic Recorder with Graphic Display and Touch Screen

AQ 500M Compressed Air Quality Testing - Portable Solution

Instructions

· DS 400-Graphic recorder with graphic display and touch screen

Residual oil measurement:

· OIL CHECK 500- Measurement of residual oil in steam with low values of 0001... 5mg/m ³, 3... 9bar, high-precision PID sensor, innovative "forced pressure change" measurement method, integrated display, with 4... 20mA analog output and digital Modbus RTU interface, including calibration certificate

·Portable transport box

·PC 400 Particle CounterUp to 0.1 µ m, used for compressing air and gases, including pressure reducers/sampling hoses, calibration certificates, Modbus RTU interfaces

Connecting cable with 5m open end

Optional:

CS Basic Edition Analysis Software - Perform data analysis with graphics and tables - Read measurement data through USB or Ethernet. License for 2 workstations

The fixed Oil Check 500 integrated heating element keeps the gas temperature above 20 ° C. It is recommended to install in places where the room temperature may drop below 20 ° C.

Mobile sampling system, including 2 m PTFE hose, quick connector (oil-free and grease free)

Connecting cable with 5m open end