1× 1.5-meter electric scooter weighing scale, electric scooter weighing 500kg electronic scale

1 × 1.5 meter electric scooter weighing scale, electric scooter weighing 500kg electronic scaleIntroduction

Check the overloading of electric vehicles using a scaleOverview:

According to the new national standard GB17761-2024 for electric bicycles, place the fully assembled electric bicycle on the weighing equipment and record its mass. The overall weight of a fully assembled electric bicycle should be less than or equal to 55 kg.

1The composition of electronic weighing scales:

A small weighing scale mainly consists of one weighing body, four sensors, one junction box, five meters of communication cable, and one weighing instrument. This is the standard configuration of a small weighing scale, and of course, there are also optional accessories, such as a weighing scale ramp, an instrument rack, and a serial port connected to a computer (such as:RS235 interface, RS485 interface, etc., instruments with printing, weighing software, etc.

IICharacteristics of electronic weighing scales:

v Gross weight, net weight, tare weight display

v Automatic peeling, manual peeling, overload and underload indication

v Automatic zero position maintenance

v Configurable printer to promptly record weighing data

v The scale surface is based on high-quality and thick patterned carbon steel material and carbon steel skeleton from Shanghai Baogang Steel Plant

v Reasonable structure, high-quality materials, high strength and hardness, strong rigidity, sturdy and durable

v High precision sensors make it easy for forklifts to move. Can be equipped with a slope

v Tabletop options: patterned board or flat board

v Surface treatment: spray painting or spray coating

v We can customize the size according to customer requirements

III1 × 1.5 meter electric scooter weighing scale, electric scooter weighing 500kg electronic scaleSpecification and dimensional accuracy:

Range: 500kg、1T、2T、3T、5T、6T、10T、15T、20T、200T；

precision 1kg、0、2kg、0、5kg、1kg、2kg、5kg、10kg、20kg、50kg；

Table size: 0.8*1.0m；1.0*1.0m；1.0*1.2m；1.2*1.2m；1.2*1.5m；1.5*1.5m；1.5*2.0m；2.0*2.0m；2.0*3.0m；2.0*4.0m；

Daily maintenance requirements for small electronic weighing scales:

1. Daily maintenance of the weighing platform (more critical)

(1) There must be no foreign objects such as stones or coal blocks stuck in the gaps around the weighing platform

(2) Regularly check whether the limit clearance is reasonable, and the limit bolt should not collide or come into contact with the scale body

(3) The connector should be maintained every six months, and the support head should be coated with butter

(4) It is prohibited to perform arc welding operations on the weighing platform. If arc welding operations must be performed on the weighing platform

Please note the following points:(Disconnect the signal cable from the weighing display controller; the grounding wire for arc welding must be set near the welded area and firmly in contact with the scale body; sensors must not be used as part of the arc welding circuit)

2. Maintenance of weighing display controller

(1) Regularly check whether the wiring is loose, broken, and whether the grounding wire is secure

(2) When the weighing display controller is not used for a long time (such as more than a month), it should be powered on and checked according to environmental conditions to avoid moisture or other adverse gas erosion that may affect its reliability

(3) The weighing display controller avoids heat sources and vibration sources

(4) There should be no flammable or explosive gases or dust in the usage environment

(5) On the same phase line of the weighing display controller

Product Configuration>>

The content includes instruction manual, certificate of conformity, packing list, charger, weighing angle, sensor, junction box, instrument, and weighing platform