Original Japanese SMC solenoid valve VS4124-001-X46 in stock

Original Japanese SMC solenoid valve VS4124-001-X46 in stockProduct Details

Original Japanese SMC solenoid valve VS4124-001-X46 in stock

5-way solenoid valve/direct acting VS4 □ 10

Directional control components>Direct acting 3, 4, 5-way solenoid valves

Direct acting solenoid valve.

It can be used under a pressure of 0MPa.

The main valve is constructed with a metal seal.

Container models: VVS410, VVS411

seriesflow characteristics

A/B→EA/EB

C［dm3/（ s ・ bar）］flow characteristics

A/B→EA/EB

bflow characteristics

A/B→EA/EB

Cvcylinder drive

sizePower consumption (W)

VS4□103.90.351.0φ805.5

SMC MXU series: uses linear guides to improve the accuracy of rod non rotation. Can be installed on three sides. Magnetic switches can be installed on both sides. Both ends are equipped with cushioning pads.

SMC MXH series: uses linear guides to improve the accuracy of rod non rotation. High rigidity, allowing a torque of more than 6 times that of the MXU series. Magnetic switches can be installed on both sides, and piping can be installed from three directions (end face and two sides) with buffer pads at both ends.

SMC MXS series: High precision guide rails with roller cross configuration. The dual cylinder structure results in twice the output force. There are positioning pin holes, so the installation repeatability is good. Can be installed axially and on the bottom. There is a symmetrical installation type. Equipped with a hydraulic buffer, it can absorb the impact at the end of the stroke and also adjust the stroke. Equipped with a travel adjuster (metal limiter) for adjusting the travel. Can be equipped with an end lock. Equipped with a buffering mechanism, once impacted at the end of the stroke, it can absorb the impact energy to protect the workpiece and fixture. If the workpiece is inserted into the groove, if the positioning is incorrect, the workpiece will encounter collision, and a buffer mechanism can absorb its impact energy.

SMC MXQ series: It uses a cyclic linear guide, so its rigidity and accuracy are higher than SMC MXS series. The dual cylinder structure results in twice the output force. There are positioning pin holes, so the installation repeatability is good. There is a symmetrical installation type. Can be installed axially and on the bottom. Can be equipped with hydraulic buffer. Can be equipped with a travel adjuster, the small foot limiter has a buffering effect, the metal limiter has high stopping accuracy, and can be equipped with an end lock. Can be equipped with a buffering mechanism.

SMC MXF series: Using cross roller guide rails, it can achieve smooth motion without shaking. The slide table and cylinder are integrated in one plane, so it is ultra-thin. There are positioning pin holes, so the installation repeatability is good. Can be installed up and down. There are two types of piping: axial and radial. Magnetic switches can be installed on the cylinder body. Can be equipped with a travel adjuster.