Spot Rexroth pressure relief valve DBDS10P1X/315 mechanical operation

In stock Rexrothpressure relief阀 DBDS10P1X/315They are direct acting seat valves used to limit system pressure. The valve is mainly composed of a sleeve (1), a spring (2), and a valve core with a damping piston (3), a lifting valve core with a damping piston (3) (pressure rating of 25... 400 bar) or a ball (4) (pressure rating of 630 bar), and a regulating type (5). The system pressure can be infinitely adjusted through adjustment method (5). The spring (2) pushes the lifting valve core (3) or ball (4) onto the valve seat. Channel P is connected to the system. The pressure in the system acts on the surface (or ball) of the moving valve. (or ball) on. If the pressure in channel P exceeds the set value on spring (2), valve (3) or ball (4) will be closed. If the pressure in channel P exceeds the set value on spring (2), lift valve core (3) or valve ball (4) to open and press against spring (2). Spring (2) opens. At this point, hydraulic oil flows from channel P into channel T. The stroke of the lift valve core (3) is limited by the pressure pattern (6). Restricted by embossing (6).

In order to achieve good pressure regulation throughout the entire pressure range, the entire pressure range is divided into 7 pressure levels. A pressure level corresponds to the maximum working pressure of a certain spring. The maximum working pressure that can be set by this spring.

Rexroth pressure relief valve DBDS10P1X/315Note:

Adjust the structure of type (5) so that it will not be lost. lose. Due to the use of universal joints for installation, the adjusting element remains loose (movable) in the regulator. The component remains loose (movable) in the adjustable type (5). In the case of unloading, the adjusting element in the regulator (5) remains loose (movable). Pressure level is' 25 ': If the minimum pressure is unstable when the regulator is unloaded, the regulating element must be' pulled back 'to the stop point because the spring and/or restoring force are low. Due to the small spring and/or restoring force, the adjusting element must be 'pulled back' to the stop position. To adjust/increase pressure, you can adjust the adjusting element and then screw it in.

Rexroth pressure relief valve DBDS10P1X/315 characteristic

▶ As a screw in plug-in valve (plug-in valve)

▶ Used for threaded connections

▶ Used for bottom plate installation

Adjustment types for pressure regulation, optional:

-Equipped with hexagonal lining and protective cap

-Rotating knob

-Handwheel

-Lockable rotary knob

Anti corrosion design

Rexroth pressure relief valve DBDS10P1X/315Dimensional data: