± 50KV High Voltage Power Amplifier

± 50KV High Voltage Power Amplifier

Product Introduction

± 50KV High Voltage Power AmplifierIt is a DC stable high-voltage power amplifier with an all solid state design, featuring high conversion rate, wide bandwidth, and low-noise operation. It is designed to provide precise voltage control within the output voltage range of 0 to ± 50 kV DC or peak AC, with an output current range of 0 to ± 12 mA DC or peak AC. The four quadrant active output stage provides current absorption or output for capacitive or resistive loads throughout the entire output voltage range. This is crucial for achieving precise output response and high conversion rate required for capacitive loads.

purpose

A high-voltage power amplifier used for industrial and scientific research purposes, adopting an all solid state design, can achieve high conversion rate, high bandwidth, and low noise output.

lDielectric research

Electron beam ion trap and ion source

Electrostatic deflection (including ion beam guidance)

Static flame control

Electrospinning

Static suspension

Electrostatic dust removal

High voltage cable testing

High voltage component testing

Plasma research (including dielectric barrier discharge)

Product Excellencemomentum

L is used to drive the four quadrant output of capacitive loads.

A high-precision closed-loop system.

Short circuit protection, used for equipment protection.

Stable DC, suitable for programmable power supply applications.

Low noise output, achieving ultra precise output.

All solid state design, maintenance free operation.

Product Parameters

‍

Product model: HCAM-50KV

Output voltage: 0~± 50 kV DC or peak AC

Output current: 0~± 12 mA DC peak AC

Input voltage range: 0~± 10 V DC or peak AC

Input impedance: 25 k Ω

DC voltage gain: 5000 V/V

DC voltage gain accuracy: better than 0.1% of full scale

DC offset voltage: less than ± 5 V

Output noise: below 10 V rms

Swing rate: (10%~90%) greater than 350 V/μ s

Small signal bandwidth: (-3 dB) DC to greater than 20 kHz (-3 dB)

Large signal bandwidth (-3 dB): DC to greater than 1.4 kHz (2% distortion)

Stability: Drift over time: less than 50 ppm/hr, non cumulative; Temperature drift: below 100 ppm/° C