Thank you to the customer in Chongqing for placing an order to purchase one suture diameter tester

Today, another order was placed and I am delighted to share with you on this wonderful day:

The Chongqing customer found Shanghai Yingle Instrument Factory through online keyword search. Before contacting our company, they had a comprehensive understanding and viewing of Yingle's equipment. There were many styles and models available online, so the customer proactively contacted me to request detailed product information and inquire about prices. This device is an instrument used for precise measurement of suture diameter. Install the suture thread on the drive mechanism connected to the measuring device, apply tension to the weight, and the equipment automatically records the thread diameter data. After contacting, our company recommended the XJ-D medical suture diameter tester to the customer based on the testing requirements and samples provided by the customer. We also sent detailed technical parameters and on-site testing videos for the customer to watch. The video explained everything comprehensively and comprehensively, making it easy to understand at a glance. This includes nominal specifications, test loads, testing, time, calibration, printing, equipment operation methods, use of weights, how to export and save them later, calibration, etc.

The testing steps for the equipment provided by the customer are as follows:

1. Remove the stitching from the packaging (without stretching) and measure directly without drying or pre-treatment.

2. Fix the suture on the wire diameter measuring instrument, place it at the center of the base and pressure plate, and apply a tension of 1/2 of its specification average breaking strength at one end of the suture [only applicable to Class B multi strand suture, Class A and Class B (single strand) suture do not apply tension]

Gently lower the presser foot and load it onto the suture: for suture with a specification greater than 0.4 metric, the presser foot load is 210g ± 3g; for suture with a specification less than or equal to 0.4 metric, the presser foot load is ≤ 60g. Note: If Class A suture is packaged in liquid, the test should be completed within 2 minutes after the suture is removed from the liquid.

3. Measure at three locations within the testing range of approximately 1/4, 1/2, and 3/4 of the suture, record the measurement values, and use them as individual values for the diameter of the suture at that location; For multi strand sutures with specifications greater than metric 2, after measuring at the specified position, rotate the suture by 90 ° and measure again. Record the two measurements and calculate the average value as the individual value of the thread diameter at that point.

4. Record the individual values of the thread diameter at each measurement point, and calculate the average of the individual values at three positions of each suture thread as the average thread diameter.

5. Repeat steps 1-4 to complete all suture testing

Testing standards: Our company can meet the requirements of YY1116-2020 "absorbable surgical sutures" and YY0167-2020 "non absorbable surgical sutures".

After the device performance is determinedWe had a simple communication regarding the delivery time and service terms. Our company can deliver the goods on time while ensuring the quality of the equipment. The service terms include one-year free warranty and lifetime maintenance in the case of non-human factors.Finally, it was about price communication. The customer clearly stated that they consulted three companies regarding this device, and from the customer's perspective, they were very understanding. They compared prices from three different companies and found products with high cost-effectiveness. Finally, regarding the price, our company has provided customers with the discounted prices we can offer. In fact, price is one aspect, and product quality and service are equally important. People nowadays place greater emphasis on product quality and test results. If the purchased equipment does not meet the standards or the test results are not good, various parts often have problems, which will correspondingly increase maintenance costs in the later stage. My personal suggestion is to.

After several days of consideration, the customer contacted me proactively and their company decided to hand over the instrument they purchased to our Shanghai Yingle factory for production. Thank you for your trust and support, and our company will not disappoint you.

We delivered the goods to the customer on time within the agreed time and arranged one-on-one training with senior technical teachers online. The customer is very satisfied with our company's quality and service. Customer satisfaction is our greatest motivation. The market competition is so fierce, and there are many peers. Although price is important, I believe that excellent quality and service are more important.I will work diligently to do everything well, ensuring that the quality of our products can withstand the test of time and our services meet customer satisfaction. Your trust is more important to me than anything else. No matter how big the industry is, sincere value, high-quality quality, and attentive service will never change.