Expanding production capacity and reducing costs, the on-site cooperation intention demand for the colloidal gold detection card production line CACLP exceeds 100 units-Chemical Instrument Network

While receiving a large number of orders, there is also a higher demand for the rapid increase in the production capacity of fast diagnostic cards. Manual card and bag loading is not only slow and expensive, but often takes a long time and may not necessarily achieve the required production capacity;Therefore, the fully automatic colloidal gold production line of Shenzhen Avidetai Biotechnology Co., Ltd. releases unlimited production capacity for you. One production line replaces 16 workers, with one investment and several months to recoup costs. This means that each line will have 16 workers working continuously, not 886 or 996, but 007, without complaints or regrets, without rest, and without paying wages.

1Automatic supply of bottom shell(Non directional vibration feeding/robot intelligent feeding), mechanical automatic detection of bottom shell direction, automatic adjustment of bottom shell direction;

2. Automatic supply of reagent plates (silo type), automatic cutting of reagent strips, automatic detection of defective areas on the 5 million pixel CCD reagent strips (defective areas need to be pre marked manually), and automatic discharge of reagent strips containing defective areas;

3. Automatically load the reagent strip onto the bottom shell, laser detects the presence of the reagent strip again, and automatically discharges defective products;

4. Automatic supply of face cover (non directional vibration feeding/robot intelligent feeding), automatic detection of face cover direction, automatic adjustment of face coverDirection: Automatically pre install the face cover onto the bottom shell with the reagent strip installed, and automatically press the face cover into place;

5. Good quality products are automatically transported to the bagging machine; Automatic supply of desiccants (vibrating disc material selection and feeding), automatic separation of desiccants, automatic supply of aluminum foil bags (silo type), automatic positioning and opening of aluminum foil bags, automatic detection of the presence of desiccants and cards, automatic loading of desiccants and cards into aluminum foil bags, automatic sealing and embossing (production batch number embossing can be added), automatic counting, and automatic sorting of finished products by number.

Equipment workflow diagram

The instrument was showcased at the Chongqing CACLP exhibition and was highly favored by customers for its rapid increase in production capacity, reduction of labor costs, and stable and efficient performance,andMore than a hundred units of cooperation intention were obtained on-site,Welcome friends to consult.