- Phone
-
Address
High salary Technology Development Zone, Pukou District, Nanjing City, Jiangsu Province
Product Categories
Nanjing Kaitaike Process Control Co., Ltd
vacuum gauge
NegotiableUpdate on 05/13
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Vacuum gauges are used to measure non corrosive, non explosive liquids or gases that do not crystallize or solidify in steel, copper, and copper alloys.
Product Details
Z-100vacuum gauge， -0.1-0MPA is composed of a measuring system (including joints, spring tubes, gear transmission mechanisms), an indicator part (including pointers, dials), and a case part. Its working principle is based on the deformation of elastic elements - spring tubes. When the measured medium enters the spring tube from the joint and generates displacement from the same end, this displacement is transmitted and amplified by the pressure of the connecting rod through the gear transmission mechanism, so that the pointer indicates the pressure on the dial.
Z-100vacuum gauge， -0.1-0MPA application scenarios:
A vacuum pressure gauge refers to an instrument that uses elastic elements as sensitive components to measure and indicate pressures higher than ambient pressure. It is widely used in almost all industrial processes and scientific research fields. It can be seen everywhere in fields such as thermal pipelines, oil and gas transmission, water and gas supply systems, vehicle maintenance and repair shops, etc. Especially in industrial process control and technical measurement processes, mechanical pressure gauges are increasingly being used due to the high mechanical strength and ease of production of their elastic sensitive components.
Key Features:
1. High measurement accuracy and fast response speed.
2. Those with an accuracy level of 0.5 or above can be used as standards.
3. The measurement is the total pressure, including the pressure of gas and steam.
4. The measurement results are independent of the type, composition, and properties of the gas.
5. During the pressure measurement process, the intake and exhaust are very small and will not affect the measured air pressure.
6. There are no high-temperature components inside, which will not cause oil vapor to decompose.
7. If materials are used for manufacturing, corrosive gas pressure can be measured.
8. The structure is sturdy and easy to seal and install.
9. Easy to operate, no need for adjustment, but requires regular calibration.
