Zirconia flue gas analyzer

1. Overview:

Zirconia flue gas analyzerOnline monitoring boiler flue gas analyzer, mainly used in thermal power plants, garbage power plants, biomass power plants, ZO-12B-ISG-1000 type, adopts direct insertion flange installation, stainless steel protective sleeve: materials include 304, 310S, 316, silicon carbide, etc.Zirconia flue gas analyzerDirectly inserted into the flue or pipeline, it can monitor the oxygen content in the flue gas in real time, with fast response speed and accurate measurement. The current signal output can monitor the oxygen content in the flue gas in real time, adjust the air-fuel ratio, improve combustion efficiency, and reduce fuel consumption. At the same time, it can also monitor smoke emissions to ensure compliance with environmental standards and reduce pollutant emissions. Optimize production: Provide real-time data to help optimize process parameters, improve production efficiency and product quality. At the same time, it also plays a certain role in fault diagnosis in process production, diagnosing combustion system faults such as air leakage and blockage through changes in oxygen content. ZO-12B-ISG-1000 Smoke Analyzer: Range: 0-25%, Output 4-20mA, Compatible with HART Protocol and RS485 Communication, Switching between Chinese and English, Full Function Series, Single Chip Microcomputer Integrated Circuit. Programmable signal output: 4-20mA, maximum load: ≤ 600 Ω, temperature control accuracy: ± 1 ℃, resolution: 0.01%, measurement accuracy: 1% FS or ± 0.1% O2, flange: DN50, DN80, DN100 (customizable)

2、 Product Category:

(1) Anti corrosion and waterproof type: Adopting an anti-corrosion design, the zirconia cell adopts anti-corrosion film electrolysis technology, and the protective tube adopts double-layer protective tube. It is mainly used in garbage power plants and chemical plants. The flue gas contains corrosive gases, which are prone to form acidic substances.

(2) Explosion proof type: Adopting explosion-proof design, the box body and junction box adopt explosion-proof design, mainly used in the chemical industry.

(3) High temperature exhaust type: for flue gas with high temperature, usually greater than 700 degrees, online measurement, LCD display, wall mounted, 0.00-25.00%, output 4-20mA, supports HART protocol, Chinese English switching, RS485 communication full function, microcontroller integrated circuit, flange installation, outer diameter 155mm, hole spacing 130mm (customizable), protective tube material: 316L, accuracy: 1%, recrystallized silicon carbide protective tube diameter: 35mm/25mm, flue gas temperature resistance 0-1600 degrees, equipped with jet pump, pressure gauge, high-temperature flange tee and other accessories, negative pressure environment with compressed air of about 0.4MPA.

3、 Product selection:

(1) ZO-12BZirconia flue gas analyzerWall mounted LCD display with zirconia probe, available in standard and anti-corrosion types, ZO-12B（Q）， Probe insertion depth: 300-1200mm

（2）ISG-1000Zirconia flue gas analyzerProbe: flange installation, customizable production, probe insertion depth: 300-1200mm, ISG-1000F, ISG-1200, ISG-800 and other different specifications of probes, anti-corrosion and standard types, mainly used in thermal power plants and waste to energy plants