ZOG-1000 High Temperature Extraction Zirconia Analyzer

Zirconia analyzer manufacturer

Our company specializes in producing zirconia analyzers, oxygen content analyzers, zirconia oxygen content analyzers, online zirconia analyzers, online detectors, online zirconia detectors, zirconia analyzer probes, which are used in power plants, chemical plants, steel plants, and hazardous waste environmental protection industries.

(1) ERUN-QZ9220 intelligent zirconia analyzer, direct insertion flange installation, 0-25%, accuracy level: 1%, output 4-20mA, HART protocol, with RS485 communication, protective tube material: 316L

（2）ZOG-1000 High Temperature Extraction Zirconia Analyzer，LCD display, wall mounted, 0.00-25.00%, output 4-20mA, supports HART protocol, Chinese English switching, RS485 communication full function, microcontroller integrated circuit, flange installation, outer diameter 155mm, hole spacing 130mm (customizable), protective tube material: 316L, accuracy: 1%, recrystallized silicon carbide protective tube diameter: 35mm/25mm, smoke temperature resistance 0-1600 degrees, equipped with accessories such as jet pump, pressure gauge, high-temperature flange tee, etc., compressed air for negative pressure environment is about 0.4MPA.

(3) ZO-801S Zirconia Oxygen Analyzer (for sulfuric acid) is a highly corrosive environmental industry with acidic gases such as SO2 and SO3 in the flue gas. It has an LCD display, wall mounted, 0.00-25.00% output, 4-20mA support for HART protocol, Chinese English switching, RS485 communication full function, microcontroller integrated circuit, zirconia probe: flange installation, outer diameter 155mm, hole spacing 130mm (customizable), insertion depth length 0-1500mm (customizable), protective tube material: 316L, precision: 1%, protective tube diameter: 57mm, waterproof and anti-corrosion zirconia tube, silicon carbide filter or ceramic filter, smoke temperature resistance 0-700 degrees.

(4) ZO-12A direct insertion zirconia analyzer, direct insertion wear-resistant zirconia analyzer, power plant boiler flue gas erosion resistant zirconia probe, using stainless steel 316L protective tube with wear-resistant protective tube

(5) ZO-12B wall mounted zirconia analyzer, LCD display, used in coal-fired power plants, direct insertion flange installation, 0.00-25.00%, output 4-20mA, supports HART protocol, Chinese English switching, RS485 communication full function, microcontroller integrated circuit, flange installation, outer diameter 155mm, hole spacing 130mm (customizable), protective tube material: 304, accuracy: 1%

(6) ZO-12C, ZO-12D wear-resistant zirconia analyzer, ZO-12E, ZO-12 (Q) disk mounted display, ZO-12 (P) wall mounted oxygen analyzer

(7) ZC-ZGRO2-3FS in-line zirconia analyzer, XM-8610TD in-line zirconia analyzer

Main technical parameters:

Range: 0.01 to 25.0% O2 (range can be freely set from 5.00% to 25.00%)

Output signal: 4-20mA load resistance ≤ 500 Ω isolated

Repeatability: ± 0.5% of full scale

Basic error: ≤± 2% (full scale)

Stability: ≤± 1% (instrument continuously calibrated for 4 hours)

Response time: When standard gas is introduced from the detector inlet, 90% response is achieved within 5 seconds

Environmental temperature: Detector -10 ℃~80 ℃ Converter 0 ℃~40 ℃

Power supply and power consumption: Power supply 220 ± 10% VAC, power consumption up to 150W

Sample gas temperature: ≤ 700 ℃ (supply negotiated above 700 ℃)

Sample gas pressure range: ± 30KPa

Flange: Outer diameter 155mm, hole spacing 130mm (can be produced according to user requirements)

Detector length: 300-2000mm (other lengths can be produced according to user requirements)