ZSR-100 Roots blower

ZSR-100 Roots blower product introduction:

ZSR-100Type Roots blowerIt belongs to the volumetric rotary blower and is a rotary compressor that uses two blade shaped rotors to compress and transport gas through relative motion inside. This type of compressor relies on synchronous gears at the rotor shaft end to keep the two rotors in mesh. Each concave curved surface on the rotor forms a working volume with the inner wall. During the rotation of the rotor, gas is taken away from the suction port. When it is moved to the vicinity of the exhaust port and connected to the exhaust port, there is a sudden increase in pressure in the working volume due to the reflux of high-pressure gas. Then, the gas is transported to the exhaust channel. The two rotors work alternately in sequence. The two rotors are not in contact with each other and are sealed by a tightly controlled gap, so the discharged gas is not contaminated.

ZSR-100Performance of Roots blower

(1) Pressure ranging from 9.8kpa to 78.4kpa, with high pressure and large air volume, is widely used in industries such as sewage treatment.

(2) Roots blowers have a hard exhaust characteristic of forced air supply, which means that when the pressure changes, the flow rate changes very little. In other words, pressure can be "automatically" adjusted within the allowable range, while flow rate changes are relatively small.

(3) The pressure varies with the change of system resistance and has adaptability. The Roots blower does not have internal compression, and the system requires as much pressure as the supporting motor power allows. Therefore, the Roots blower can provide as much pressure as possible, making its pressure adaptive.

(4) The fan has a compact structure, small volume, and light weight.

(5) The conveying medium does not contain oil. There are narrow gaps between the rotors of the Roots blower and between the rotors and the casing or wall panels, which do not come into contact with each other during high-speed operation of the rotors. Therefore, there is no need to lubricate the rotors, and the medium does not contain oil.

(6) The impeller adopts the self-designed profile of our factory, which greatly improves the sealing performance. The main components have high precision, advanced and reasonable structure, reliable and stable operation, low vibration, low noise, long service life, and easy operation and maintenance.

ZSR-100typeCharacteristics of Roots blower:

1. Because the impeller does not wear out inside the body, there is no need to use moisturizing agents, so sodium excretion does not contain oil. It is an ideal power transmission source for industrial manufacturing such as chemical and food industries.

2. Roots blower is a capacity flow blower. When pressure is applied, the scalar changes very little with the variation of pressure. But scalars vary with speed. Therefore, the selection of stamping services is very extensive, and scalar selection can be achieved by selecting the rotational speed.