ZNJC09020201 flow switch ZNJC09010101

ZNJC09020201 flow switch ZNJC09010101The model

ZNJC09010301、ZNJC09020101、ZNJC09020201、ZNJC09010101、

Characteristics of ZNJC09010301 Flow Controller ZNJC09020101

1. This product comes with a 2-meter wire that is connected through a waterproof aviation plug;

2. The voltage cannot be higher than the voltage on the label (can be lower than); The current cannot be higher than the current indicated on the nameplate (can be lower than);

3. The flow setting value has been set according to the user's situation at the factory, and customers can adjust it according to their needs;

Before connecting to the pipeline, use your fingers or screwdriver to push the moving parts (pistons) inside the pipe, pushing three or four times

Just go down;

To prevent oil or water leakage, please install a tape at the threaded connection;

6. Please ensure that the arrow on the shell is consistent with the direction of water flow;

7. DC24V circuit, capable of carrying LED display lights, with a conduction resistance of approximately 18K ohms;

8. DC24V circuit, without LED display light, with a conducting resistance of 10 ohms;

9. AC220V circuit, without LED display light, with a conducting resistance of 10 ohms;

ZNJC09020201 flow switch ZNJC09010101The principle of

ZNJC09010301, ZNJC09020101 lubricating oil flow switch, or can also be used for water. The shell is made of stainless steel material with stable performance. ZNJC09020201 and ZNJC09010101 are equipped with traffic indicator function, which can display real-time traffic size. The product outputs a switch signal, and when the flow rate is too low, the two switch contacts that were originally conductive become disconnected; This signal can be connected to the PLC to monitor real-time changes in flow and prevent the machine from idling.