T210 pressure sensor LK2088GP75F22AM4

T210 pressure sensor LK2088GP75F22AM4The principle of

Pressure transducer is a sensing electronic device that converts pressure signals into electrical signals. It consists of pressure sensitive components and signal processing units, and is divided into gauge pressure, differential pressure, and absolute pressure sensors according to measurement types. Its working principle is based on the piezoresistive effect, piezoelectric effect, or capacitive effect. The elastic deformation is converted into a voltage signal through a Wheatstone bridge, and a standardized electrical signal such as 4-20mA is output.

Installation of LK2088GP75F22AM4 pressure sensor

(1) The pressure sensor must be installed along the cable and installed at the cable joint.

(2) Each cable should be equipped with no less than 4 pressure sensors, and the two pressure sensors near the telephone office should be no more than 200m apart.

(3) Install one at the beginning and one at the end of each cable.

(4) Each cable should have one branch point installed. If two branch points are close together (less than 100 meters), only one can be installed.

(5) One cable should be installed at the location where the cable laying method (overhead, underground) changes

(6) For cables without branches, due to the consistent cable program of the base line, the installation spacing of pressure sensors should not be more than 500m, and the total number should not be less than 4.

(7) In order to facilitate the determination of the fault point of the pressure sensor, in addition to installing the pressure sensor at the starting point, an additional one needs to be installed at a distance of 150-200m from the starting point. Of course, in the design, economic and technical factors must be considered. If the pressure sensor does not need to be installed, it should not be installed.

T210 pressure sensor LK2088GP75F22AM4The application

The LK2088GP75F22AM4 pressure transmitter is mainly used in fields such as booster cylinders, boosters, gas-liquid booster cylinders, gas-liquid boosters, presses, compressors, air conditioning and refrigeration equipment.