- Phone
-
Address
North of Liulijing Village, Quanpu Town, Liangshan
Product Categories
Liangshan Rongchuang Second hand Equipment Purchase and Sales Co., Ltd
Yunik 30 cubic ethylene oxide sterilization cabinet has arrived
NegotiableUpdate on 05/18
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The operation of the 30 cubic meter ethylene oxide sterilization cabinet from Younike must strictly follow the full process specifications of pretreatment, loading, sterilization, analysis, and safety monitoring upon arrival. The core steps include item pretreatment, standardized loading, parameter setting, sterilization execution, and residue analysis.
Product Details
Yunik 30 cubic ethylene oxide sterilization cabinet has arrived
Yunik 30 cubic ethylene oxide sterilization cabinet has arrivedThe operation of the ethylene oxide sterilization cabinet must strictly follow the full process specifications of pretreatment, loading, sterilization, analysis, and safety monitoring. The core steps include item pretreatment, standardized loading, parameter setting, sterilization execution, and residue analysis.
1、 Preprocessing stage
Cleaning and DryingItems to be sterilized need to be cleaned to remove organic matter such as blood and oil, and avoid using physiological saline for cleaning; Dry until there are no water droplets to prevent water from diluting the concentration of ethylene oxide.
packaging requirementsPackaging with breathable materials such as paper and non-woven fabric to ensure penetration of ethylene oxide; Prohibited from packaging non degreased equipment or sealed containers.
2、 Loading specifications
Placement principleReserve a passage of ≥ 2cm between items, with a distance of ≥ 1cm from the cabin wall. The loading capacity should not exceed 80% of the container capacity to avoid overlap or contact.
Place biological indicatorsPlace biological indicators at the most difficult sterilization locations (such as inside the instrument, multi-layer packaging center) and at various points on the upper, middle, and lower layers to verify the sterilization effect.
3、 Sterilization operation
Parameter SettingsSet the temperature (37-63 ℃), humidity (40-80%), concentration of ethylene oxide (450-1200mg/L), and time (1-6 hours) according to the material of the item.
execution flowVacuum pumping → Injection of ethylene oxide → Maintenance of set conditions → Automatic timing, during which temperature, pressure, and gas concentration are monitored.
4、 Analysis and post-processing
Forced ventilationAfter sterilization, residual ethylene oxide is discharged through vacuum or circulating suction to ensure that the gas concentration drops to a safe threshold.
Residual detectionGas chromatography is used to detect residual amounts, with metal instruments ≤ 10 μ g/g and plastic products ≤ 5 μ g/g. Only after passing the inspection can they be released.
5、 Safety and Monitoring
personal protectionWear protective masks, gloves, and goggles during operation to avoid direct contact with ethylene oxide; If a leak occurs, evacuate immediately to a ventilated area.
Equipment inspectionRegularly inspect pipeline sealing, door locks, and exhaust systems to ensure no leaks; Monitor the air concentration in the working environment annually.
attentionEthylene oxide is a flammable, explosive, and toxic gas. The operating environment should be kept away from sources of fire and equipped with explosion-proof facilities. It is strictly prohibited to come into contact with sterilization before sufficient analysis
Similar Product Recommend
