YXS digital constant temperature water bath

YXSDigital Display Constant Temperaturewaterbathpot

I. Overview

　　YXSThe digital constant temperature water bath is based on our existing constant temperature water bath in China and refers to similar foreign productsYY91037－1990Design and manufacture new products based on standards. This series of products is designed with advanced technology, and the main components are made of stainless steel. The temperature control system adopts digital electronic temperature control circuits, which greatly improves the stability and reliability of the product.

This series of products has accurate temperature preset and display functions,BThe series adopts a pointer type display, which is easy to operate, safe and reliable.YXSType electric constant temperature water bath is a device used for distillation, concentration, drying, and constant temperature heating in laboratories of medical, scientific research institutions, colleges and universities, as well as chemical, printing and dyeing, pharmaceutical and other industrial and mining enterprises.

2、 Technical indicators

1Working voltage 220V50HZ　　　2Constant temperature accuracy±1℃－５℃

3Self weight approximately 15kg4. Power300W -2000W

５、heating temperature 50℃－200℃

3、 Usage method

1The water bath should be placed on a stable workbench.

2Add water above the partition before use70-150millimeter,Or add water appropriately according to the needs of the instrument.

3Connect the power, turn on the switch, and set the desired temperature. The green light indicates heating, and the instrument can automatically turn on and off a few times to keep the temperature constant at the set value.

4Introduction to Instruments：

⑴ The pointer type meter can be set by rotating the temperature knob to the desired temperature

⑵ Intelligent instrument-PIDThe bottom left button of the control panel is the setting button, the second left button is the shift button, the third left button is the decrease value button, and the fourth left button is the increase value button. The upper window is the measurement value display unit, and the lower window is the setting value display unit.

4、 Precautions

1The power supply voltage must match the required voltage of the product, and the power socket must be well grounded.

2When injecting water, do not let water flow into the chassis.

3When using, place a partition, add water, and then turn on the power. Cannot dry burn.

4After use, promptly pour out the water, wipe it clean, keep it dry, and clean.

5The packaged product should be placed at a temperature -40℃～＋50℃The relative humidity is not greater than93%Indoor.