HSS-1 digital constant temperature measuring cylinder water bath

HSS-1 graduated cylinder constant temperature water bath

Instruction Manual

Thank you for using our company's products.

Please do not carefully read these instructions before using this product.

This product is classified according to the safety category of medical appliances and belongs toIclassBType.

I. Overview

HSS-1The Type series electric constant temperature water bath is based on our existing constant temperature water bath in China, and refers to similar foreign productsYY91037－1990Design and manufacture new products based on standards. This series of products is designed with advanced technology, and the main components are made of stainless steel. The temperature control system adopts digital electronic temperature control circuits, which greatly improves the stability and reliability of the product.

This series of products has accurate temperature preset and display functions,BThe series adopts a pointer type display, which is easy to operate, safe and reliable.HSS-1The Type series electric constant temperature water bath is a device used for distillation, concentration, drying, and constant temperature heating in laboratories of medical, scientific research institutions, colleges and universities, as well as chemical, printing and dyeing, pharmaceutical and other industrial and mining enterprises.

2、 Technical indicators

1Working voltage220V　50HZpower1500W

2Constant temperature accuracy ±1℃

3Self weight approximately10kg.

3、 Usage method

1The water bath should be placed on a stable workbench.

2Add water above the partition before use50-70millimeter

3Connect the power, turn on the switch, and set the desired temperature. The green light indicates heating, and the instrument can automatically turn on and off a few times to keep the temperature constant at the set value.

4Instrument operation:The bottom left button of the dashboard is the setting button, the second left button is the shift button, the third left button is the decrease value button, and the fourth left button is the increase value button. The upper window is the measurement value display unit, and the lower window is the setting value display unit. When using, it is necessary to first set the required temperature and then control it automatically. Setting method: Press the setting button once to enter the setting state, then press other buttons to reach the desired temperature, complete the setting, and finally press the setting button once to save and exit. The instrument will enter the working state

4、 Precautions

1The power supply voltage must match the required voltage of the product, and the power socket must be well grounded.

2When injecting water, do not let water flow into the chassis to prevent electric shock.

3When using, place a partition, add water, and then turn on the power. Cannot dry burn.

4After use, promptly drain the water, wipe it clean, keep it dry, and clean.

5The packaged product should be placed at a temperature -40℃～＋50℃, relative humidity not exceeding93%Indoor.