Y-shaped pneumatic three-way material distribution valve

Application IndustryChemical plastic particles, calcium carbonate powder, white carbon black, magnetic powder, cement, flour, soy sauce, food raw materials, etcDomain.There are three types of valve body structures for pneumatic three-way directional valves:Angle within 45 degrees, angle outside 45 degrees, and angle within 90 degrees.1、 45 degree angle insideA is for import, B and C are for export respectivelyCondition 1: A and B are connectedCondition 2, A and C are connected2、 External 45 degree angleA is for import, B and C are for export respectivelyCondition 1: A and B are connectedCondition 2, A and C are connected3、 90 degree angleA is for import, B and C are for export respectivelyCondition 1: A and B are connectedCondition 2, A and C are connectedMain parameters of pneumatic three-way directional valve:1. Valve body parametersProduct ModelCXQ642F-16PNominal DiameterDN50-300mmNominal Pressure1.6MPastructural formball typePipeline angle135°*45°， 135°*90°valve bodySUS304、316LsphereSUS304、316Lvalve stemSUS304、316LsealPTFEfillerPTFEApplicable Temperature-20℃～+130℃connection methodflange connection2. Executor parametersType of executing agencyAT type double acting pneumatic actuatorgas supply pressure0.55-0.7MPaair source interfaceG1/4'ambient temperature-20～+65℃mode of actiondouble-actingOptional attachmentsElectromagnetic valve, valve position feedback, air filterProduct features of pneumatic three-way directional valve:Valve body materialMainly made of stainless steel SUS304 and SUS316L, the shell and main components are precision castMade with sturdy structure, high strength, not easily deformed, and beautiful appearance.Valve internal flow channelThe form is 135 degree switching, with smooth and smooth flow channels, low fluid resistance, and strong flow capacity,It will not allow the medium to stay inside the flow channel, achieving good and smooth switching of various pipelines.valve seat sealMade of Japanese Daikin PTFE material, wear-resistant and erosion resistant, with three sided valve seat sealing, suitable for zero leakage workThe situation.Maintenance and upkeep of pneumatic three-way directional valveThe three-way directional valve is a high-precision instrument, and regular maintenance is closely related to the normal operation and extended service life of the equipmentThe system.1. During use, pay attention to whether the connecting parts are loose, and tighten them with a wrench if there is any looseness.2. Pay attention to tightening the screws at the actuator, valve shaft, and connecting bracket. If the connecting sleeve is worn, please replace it in a timely manner.3. For materials that are prone to sticking to the valve cavity, the valve needs to be flushed after a period of use. During flushing, the valve runsTo the half open state and keep switching back and forth, impurities in the dead corners of the valve will be washed away, which can reduce the valveThe resistance during operation can also reduce the pollution of the next circulating material.4. If the sealing surface is worn due to a lack of lubricant, a small amount of grease can be injected appropriately to increase the sealing surface of the sphereLubrication degree.Y-type pneumatic three-way directional valve angle 90 degree connection dimension diagram: