Xinjiang Autonomous Region Dynamic Control Intelligent Data Acquisition Instrument

Dynamic control intelligent data acquisition instrument

K37AEnvironmental protection data acquisition instrumentIncludes 6 RS-232 serial ports, 6 RS-485 serial ports, and 2 road networksPort, 16 channels of 4-20mA analog signal input port, 8 channels of DI switch input port8 Road DO relayOutput port of the device. 6-channel RS-232 for com1-com6 is used to collect intelligent instruments with similar interfacesThe data of instruments includes COD online monitoring instrument, ammonia nitrogen online monitoring instrument, and total phosphorus online monitoring instrumentDetector, total nitrogen online monitoring instrument, flow meter, etc. Additionally, when com1-com6 is not occupied,Can also be used to output K37A to other devices with similar interfacesEnvironmental protection data acquisition instrumentCollected data.6-way RS-485 is used to collect data from intelligent instruments with similar interfaces. 6-way RS-485When the instrument inside is not occupied, it can also be used to output K37A to other devices with similar interfacesEnvironmental protection data acquisition instrumentCollected data. When the intersection of road network 2 is not occupied, it can be used to collect data with similar characteristicsThe data of intelligent instruments and meters for interfaces. 16 channels of 4-20mA analog signal input port for standard connectionAccurate 4-20mA transmitter current signals, such as pH meters, flow meters, pressure transmitters, etc., can also be usedConnect current transformers to measure the operating current of environmental protection facilities and monitor their performanceOperating power. 8-way switch input is used to monitor the on/off status of environmental protection facilities.

Dynamic control intelligent data acquisition instrument

K37AEnvironmental protection data acquisition instrumentIt is a data acquisition and communication unit installed at the pollution source discharge outlet, which communicates withpassRS-232TheRS-485The4-20mACollect pollutant data through current signals and wireless communication4G(All network)2 Communication methods such as Ethernet are used to communicate with the remote monitoring center.K37AEnvironmental protection data acquisition instrumentThe default configuration is:2 a100M/1000MAdaptive wired EthernetNetwork interface and1 A wireless4G(Full network) interface.

6 Road belt isolationRS-232Interface, baud rate range:1200-115200；

6 Road belt isolationRS-485Interface, baud rate range:1200-115200；

16 Road analog input channel,16 Bit resolution, supported4-20mACurrent signal;

8 Switch input channel with road strip isolation, input voltage range:0-5VDC；

8 Relay output, contact load5A 250VAC/30VDC；

1 Road ExpresswayUSB 2.0Interface,1 Road SuperhighwayUSB 3.0Interface;

built-in2 road100M/1000MAdaptive Ethernet interface;

built-in4G(Full network) communication module;

Bluetooth/WiFiCommunication module;

Built in shutdown and restart button;

Built in high-capacity lithium battery to meet power outages6 More than hours of battery life;

Built in high-precision clock chip;

10.1 Inch color LCD display screen, multi-point capacitive touch screen, resolution1024*600；

2.0GHzThe main frequencyCPU；

64GB(Including system space)Storage space to meet storage needs3 Requirements for data over the year, includingmiddle4GBDedicated storage space for logs, meeting storage needs3 Log information over the year;

2GBThe memory space;

runLinuxOperating system;