XMDA-16A Intelligent Digital Inspection Instrument

XMDA-16A Intelligent Digital Inspection Instrument

XMD-16A Intelligent Digital Inspection Instrument Shanghai Automation Instrument Factory No. 6

XMD-16A Intelligent Digital Inspection Instrument Product Introduction

The accuracy is ± 0.5% FS ± ldig.

Made with chips, it has a high degree of intelligence.

1-6 channels can be freely selected, and manual/automatic inspection can be switched.

Each channel can be set with upper and lower limit alarms, and there are 4 alarm contact outputs.

Small size and reliable installation structure.

XMD-16A Intelligent Digital Inspection Instrument Specification Parameters

The accuracy is ± 0.5% FS ± ldig. Made with chips, it has a high degree of intelligence. 1-6 channels can be freely selected, and manual/automatic inspection can be switched.

XMDA-16A Intelligent Digital Inspection Instrument

XMD-16A Intelligent Digital Inspection Instrument Product Technical Data

input format

thermocouple

B：0～1800℃ S：0～1600℃

K：0～1300℃ E：0～800℃

T：0～400℃ J：0～1000℃

EA2：0～800℃ N：0～1300℃

thermal resistor

Ptl00：-199.9～6000C BA1：-199.9～600℃

Cul00：-50～150℃ BA2：-199.9～600℃

Cu50： -50～150℃

direct current

0～10mA,0～20mA,4～20mA.0～500mA

DC voltage

0～20mV，0～100mV，0～5V，1～5V

Others:

Remote transmission pressure gauge 0-400 Ω, frequency 0.01-10000Hz

Note: The measurement range of DC current, DC voltage, and remote pressure gauge can be programmed freely.

output format

call the police

This instrument has four sets of contact outputs that can work in the following three modes for unified alarm: 16 point upper and lower limit alarm points are uniformly set with upper and lower limit alarms, and two-way relay outputs. The 1-16 alarm points (upper and lower limits) can be set with different values, and as long as one of them exceeds the limit (upper or lower limit) and the two relays have corresponding outputs.

Note: The external dimensions of A and H shapes marked with an asterisk (*).

4-channel inspection alarm and l2 inspection display: The first four channels can each use a separate set of relays for alarm or control, while the remaining 12 channels are used for patrol inspection.

Note: One or two modes can add two real-time reporting channels that can be used as needed.

The relay contact capacity is 3A, 200V AC.

power supply

220V±10％AC 50Hz±5％