The XDL-6 intelligent rapid sulfur analyzer is mainly used to determine the total sulfur content in coal, steel, and various minerals. It is a laboratory instrument for coal, power, chemical, building materials, metallurgy, geological exploration, commodity inspection, environmental protection testing and other departments. Meets the requirements of the national standard GB/214-2007 "Method for determination of total sulfur in coal".
Technical parameters of XDL-6 fast intelligent sulfur analyzer:
Automatically controlled by a microcontroller, it automatically corrects zero drift and eliminates the need for users to adjust the instrument.
The furnace temperature can be set as needed through keyboard input, without the need to turn on the machine.
Allow users to compensate and correct measurement deviations caused by testing conditions, and perform segmented correction without losing power outage data.
Adopting automatic adjustment of furnace flow size, automatic opening of electrolysis, automatic determination of titration endpoint, and no occurrence of over electrolysis phenomenon.
Testing method: software coulometric titration
Sulfur measurement range: 0-20%
Temperature control accuracy: ± 5 ℃
Single sample testing time: approximately 5 minutes
Heating rate: 25-30 ℃/min, can reach 1200 ℃ in about 30 minutes
Analysis time: about 4-8 minutes (automatic determination of titration endpoint can be ended early and returned)
Sample weight: ≤ 100mg (depending on the type and weight of the sample)
Resolution: 0.001%
Sulfur measurement accuracy: meets the requirements of the national standard GB/T214-2007
Power supply: AC220V ± 10% 50Hz
Instrument size (cm): Controller: 350x155x280
Furnace body: 580x250x270
Standard configuration of XDL-6 fast intelligent sulfur analyzer
10 porcelain boats, 2 rolls of printing paper, 260ml of electrolyte preparation, 1 bottle of color changing silicone gel, 1 set of purification device, 1 electrolytic cell, 1 silicon carbon tube, 2 reducing tubes, and 2 quartz boats