Wuxi input type liquid level transmitter. The HLY type diffusion silicon liquid level transmitter is a two-wire system, with 4-20mADC output and 24VDC DC power supply. The part in contact with the medium is entirely made of stainless steel, and it is directly installed on the measuring pipeline. It is extremely convenient to use and widely used in process control and liquid level measurement in industries such as petroleum, chemical, metallurgy, water conservancy, power, food, medicine, and environmental control.
Wuxi Input Type Liquid Level Transmitterworking principle
Principle of static pressure measurement:
When the liquid level transmitter is inserted into a certain depth of the measured liquid, the pressure formula on the sensor facing the liquid level is: Ρ=ρ. g.H+Po, where:
P: Pressure exerted on the liquid level of the transmitter
ρ: Density of the tested liquid
G: Local gravity acceleration
Po: Atmospheric pressure on the liquid surface
H: Depth of liquid input into the transmitter
At the same time, the pressure of the liquid is introduced into the positive pressure chamber of the sensor through gas guiding stainless steel, and the atmospheric pressure Po on the liquid surface is connected to the negative pressure chamber of the sensor to offset the Po on the back of the sensor, so that the pressure measured by the sensor is: ρ g. H. Obviously, by measuring the pressure P, the depth of the liquid level can be obtained
Wuxi Input Type Liquid Level TransmitterFeatures
Good stability, with full load and zero position stability up to 0.2% FS/year. Within the compensation temperature range of 0-70 ℃, the temperature drift is less than 0.2% FS, and within the entire allowable operating temperature range, it is less than 0.5% FS.
◆ Equipped with reverse protection and current limiting protection circuits, the transmitter will not be damaged if the positive and negative poles are reversed during installation. In case of abnormalities, the transmitter will automatically limit the current to within 35MA.
Solid state structure, no movable parts, high reliability, long service life.
Easy installation, simple structure, economical and durable.