KCGL-11D signal isolation distributor

NegotiableUpdate on 05/07

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

KCGL-11D signal isolation distributor, this intelligent signal isolator adopts input, output, and power three terminal isolation technology, electrical isolation, and disconnects the direct circuit (DC path) in the process loop, greatly enhancing the stability and anti-interference ability of the detection and control circuit signals, thereby improving the reliability of the entire system

Product Details

KCGL-11D signal isolation distributorProduct Overview
This intelligent isolator adopts digital technology, which has multiple performance advantages that traditional analog instruments do not have. It has excellent performance in suppressing high and low frequency interference signals, and can still be reliably applied even in high-power frequency conversion control systems. At the same time, the application of digital technology overcomes the shortcomings of traditional temperature transmitters' linearity. It adopts various technologies such as digital calibration, zero free and full scale potentiometers, automatic dynamic zero calibration, temperature drift automatic compensation, etc., and meets the requirements of Class IV (harsh industrial field) environment for electromagnetic interference resistance of products specified in IEC61000-4-4:1995. The application of this series of technologies ensures the stability and reliability of the product scientifically.

KCGL-11D signal isolation distributorProduct Features

◆ Fully intelligent, digital, on-site programmable
Design of 16 bit high-precision acquisition chip
◆ Input fault status indication
22.5mm thickness, convenient for dense installation
◆ Standard DIN35mm rail installation
Technical Specifications

Transmission accuracy: ± 0.2% F · S (25 ℃± 2 ℃)
◆ Temperature drift: ≤ 50ppm/℃ (-20~+60 ℃)
Input impedance: current ≤ 100 Ω; Voltage ≥ 500K Ω
Load capacity: current ≤ 500 Ω; Voltage ≥ 1M Ω
Response time: ≤ 0.5 seconds
◆ Dielectric strength: ≥ 1500V AC (between input/output/power supply, leakage current 1mA, testing time 1min)
◆ Electromagnetic compatibility: meets the requirements of Class III industrial site anti electromagnetic interference in IEC61000-4-4:1995
Power supply: 20-30V DC (direct current)
95-265V AC (alternating current)
Power consumption: 0.9-1.8W (depending on the model)
Working temperature: -20 to+60 ℃