Installation precautions

1The installation method of the sensor is fixed bracket installation. If drilling is not allowed on site, adhesive can also be used, but the heat resistance, cold resistance, service life and other related parameters of the adhesive need to be considered.

2The sensor is inWithin 100 meters, you can pass through 4 walls, but try to minimize obstacles between antennas.

3The distance between the collector and the sensor is controlled withinWithin 500 meters, try to minimize obstacles as much as possible.

4The same collector is generally standard20 sensors, expandable up to a maximum of 50.

5Try to keep the antenna away from large areas of metal planes or ground to avoid signal attenuation.

6Try to ensure that the antenna is in a parallel visible state on the same horizontal plane as much as possible, and the signal is optimal in this state. The signal is poor when the antenna is directly aligned and when it is diagonally aligned on different horizontal planes.

7The antenna should ensure stable connection and not loosen.