1Wet needle hole leak detector manufacturer

The LCS-9 wet sponge pinhole leak detector from Luchao Company applies wet sponge testing technology and is designed to meet the new standards of high-quality, low-voltage leak detectors for wet sponge leak detectors. Used to measure defects such as pinholes, gaps, and damages in insulation coatings below 500 microns on conductive substrates. LCS-9 is a multi voltage leak detector.

The LCS-9 wet sponge pinhole leak detector meets the following standards: ASTM 3894.2, ASTM D-5162 A, ASTM G6, ASTM G62-A, BS 7793-2, ISO 8289, ISO 8289 A, ISO 14654, NACE RP 0188。

IIWet pinhole leak detectortechnical performance

1. Overall performance:

(1) Three voltages are available for selection: 9V/67.5V/90V;

(2) Visible signals and audio alarms;

(3) Low voltage indicator;

(4) Easy to install and remove signal lines;

(5) Large standard sponge;

(6) Portable packaging box;

2. Detailed parameters:

(1) Applicable detection thickness: 9V -300 microns;

67.5V -500 microns;

90V -500 microns;

(2) Sensitivity: 9V -90K Ω 5%;

67.5V—125KΩ 5%；

90V——400KΩ 5%；

(3) Voltage accuracy: 5%;

(4) Battery: Lithium polymer battery (Li pol) 11.1V/1100mA;

(5) Power consumption: ≤ 0.5W;

(6) Weight: 550g;

(7) Size: 300 × 55 × 55mm;

(8) Voltage indication: Three voltages are indicated by corresponding LED lights;

(9) Battery Charging: Specially equipped with a 12VDC lithium battery constant voltage charger;

(10) Sponge size: 170 × 70 × 30mm;

(11) Probe length: 190mm;

(12) Ground wire length: 4m