- Phone
-
Address
No. 1210 Dongfang Avenue, Wuzhong Economic Development Zone, Suzhou
Product Categories
Suzhou Changliu Purification Technology Co., Ltd
Wet laser particle size analyzer
NegotiableUpdate on 05/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Winner2000 wet laser particle size analyzer is one of the earliest instruments developed by the company. After more than 20 years of testing and several technological upgrades, the test data is accurate and stable, and can meet the general requirements of particle size testing for users.
Product Details
Winner2000Wet laser particle size analyzerIt is one of the earliest instruments developed by the company. After more than 20 years of testing and several technological upgrades, the test data is accurate and stable, and can meet the general particle size testing requirements of the user unit.
Product advantages:
Good stability
One of the earliest developed instruments for the company, with accurate and stable testing data and high cost-effectiveness.
Three level testing techniques with higher resolution
Samples with narrow distribution can choose three levels of testing to narrow the measurement range and obtain higher testing resolution.
Unconstrained free fitting technique
Granularity analysis is not limited by any function and truly reflects the distribution state of particles.
Advanced optical path design
The use of converging light Fourier transform optical path overcomes the limitation of lens aperture on scattering angle and enhances the ability to distinguish submicron particles.
Wet laser particle size analyzerMain parameters of the product:
Specification Model |
Winner2000B three levels |
Winner2000E |
||
execution standard |
ISO 13320:2009； GB/T19077-2016； Q/0100JWN001-2013 |
|||
test scope |
0.1-40μm /0.6-120μm /1-300μm |
0.1-300μm |
||
Number of detector channels |
76*3 |
78 |
||
Accuracy error |
≤ 0.5% (D50 value of national standard sample) |
|||
repeatability error |
≤ 0.5% (D50 value of national standard sample) |
|||
Laser parameters |
High performance laser p>2mW, service life:>25000H |
|||
Built in dispersion method |
ultrasound |
Frequency: f=40KHz, power: p=60W, adjustable time |
||
stir |
Speed: 0-3000rpm, adjustable speed |
|||
cycle |
Rated flow rate: 8L/min Rated power: 10W |
|||
sample pool |
Capacity: 350mL |
|||
Software features |
Analysis mode |
Including free distribution, R-R distribution, lognormal distribution, and hierarchical statistical models, it meets the different requirements of different industries for the statistical methods of particle size of the tested samples |
||
statistical method |
Volume distribution and quantity distribution to meet different statistical methods for particle size distribution in different industries |
|||
statistical comparison |
Statistical comparative analysis can be conducted on multiple test results, which can significantly compare the differences in test results between different batches of samples, samples before and after processing, and test results at different times. This has strong practical significance for industrial raw material quality control |
|||
Custom analysis |
User defined analysis parameters, calculated as percentages based on particle size, percentages based on particle size, or percentages based on particle size ranges, to meet the characterization requirements of different industries for particle size testing |
|||
Test Report |
The test report can be exported in various forms such as Word, Excel, images (Bmp), and text (Text), meeting the needs of viewing test reports in any situation and citing test results in scientific research articles |
|||
Multilingual support |
Chinese and English language interfaces are supported, and other language interfaces can also be embedded according to user requirements. |
|||
Intelligent operation mode |
Equipped with intelligent operation mode, it can automatically control the steps of water inlet, dispersion, testing, etc., which not only reduces the workload of testing personnel, but also improves the repeatability of test results due to no human interference. |
|||
Operation Mode |
Film sticking key operation |
|||
test speed |
<2min/time |
|||
volume |
680mm*350mm*440mm |
|||
weight |
32Kg |
|||
Mainly applicable to:
Measure the particle size distribution of solid powder or particles in lotion, such as cement, ceramics, drugs, lotion, coatings, dyes, pigments, fillers, chemical products, catalysts, drilling mud, abrasives, lubricants, pulverized coal, silt, dust, food, additives, pesticides, graphite, photosensitive materials, fuels, ink, metal and non-metallic powders, calcium carbonate, kaolin, coal water slurry, other powdery materials, suspensions, and aerosols.
