Water quality three parameter analyzer

The WBXY-DCS20A300 online three parameter water quality analyzer (hereinafter referred to as the instrument) is a water quality online monitoring instrument with a microprocessor. A water quality analyzer is an industrial online monitoring instrument designed to measure the inflow and outflow of municipal sewage, industrial wastewater treatment processes, waterworks, river monitoring, and other sources.

PH: The instrument consists of signal measurement, operation, display, network communication, and panel instructions. The impedance transformation of pH and temperature is used to convert pH into a low impedance signal of 59.16mV/pH (25 ° C); Convert NTC into a voltage signal.

Residual chlorine: The instrument consists of signal measurement, calculation, display, network communication, and panel instructions. The residual chlorine electrode contains a temperature electrode, and the pH electrode amplifies the sampled signal into a low resistance voltage signal through an instrument amplifier, which is then used for calculation and display of the measured value.

Turbidity: During the transmission process, only a small portion of the light waves emitted by the infrared sensor transmitter can reach the receiver after being absorbed, reflected, and scattered by the measured substance. The transmittance of the transmitted light is proportional to the concentration of the suspended substance being measured, and the concentration of turbidity is calculated by measuring the transmittance of the transmitted light.