Wastewater Total Iron Water Quality Analyzer

Wastewater Total Iron Water Quality Analyzer

Model: PROCON5000

Wastewater Total Iron Water Quality AnalyzerOverview：It is an analyzer used to measure or control the concentration of dissolved iron (Fe; Fe *) in water. Determine the total iron content in water by detecting the amount of reaction products such as pyridine triazine (low concentration dissolved iron) or 1,10-phenanthroline complex (high concentration dissolved iron) using spectrophotometry.

Wastewater Total Iron Water Quality Analyzerapplication：Widely used in various fields such as environmental protection, metallurgy, chemical engineering, pharmaceuticals, food, scientific research, etc., mainly for water quality monitoring, process control, quality testing and other scenarios

Wastewater - Total Ironwater qualityanalyzerThe working principle of：

Determine the total iron content in water by detecting the amount of reaction products such as pyridine triazine (low concentration dissolved iron) or 1,10-phenanthroline complex (high concentration dissolved iron) using spectrophotometry. The analyzer mainly consists of a control unit and a measurement and analysis unit including a measuring chamber, valves, metering pumps, and some pipelines. The host microprocessor controls the entire measurement process, including sample injection, flushing, reagent pumping, and photoelectric system detection.

Wastewater - Total Ironwater qualityanalyzerProduct Features：

● Automatic measurement, including self check and drift compensation;

● Different measurement ranges to choose from;

● The touch screen is easy to operate;

The limit and alarm values can be adjusted;

● Programmable 0/4-20mA analog output;

● USB data collection (optional);

● Adjustable analysis interval;

● External start stop analysis is possible;

No additional calibration is required;

● Wide power range (110-230v, 50-60Hz);

External plug connection (IP65) is used for alarm/limit/analysis relays, external start stop, and analog output.

Technical specifications：

Measurement parameters: Total iron (Fe2+, Fe3+)

Measurement range: 10-500ppb/0.1-20.0ppm

Resolution: 1ppb/0.1ppm Accuracy: 2%

End value repeatability: 1%

Final zero stability: automatic adjustment

Analysis cycle: 4-7 minutes including flushing

Interval: 1min-99min or external start stop

Current output: 0/4-20mA, maximum load 500 ohms

Display: 240 * 128, touch screen

Working temperature: 5-45 degrees Celsius

Electrical connection: 1.5 square millimeter circular plug connection

relay1 * Alarm, passive 230V/50HZ, 3A;

1 * Limit value, passive 230V/50HZ, 3A;

1 * Analysis status, passive, 230V/50HZ, 3A

Power supply voltage: 110-230V (50/60HZ)）

Energy consumption:Approximately 16VA

size：640*315*190mm(H*W*D)

Protection level: IP65