Wall mounted LED explosion-proof light

Wall mounted LED explosion-proof lightOrdering Instructions:

1. According to the on-site lighting requirements, specify the product power and installation method;

2. Please indicate if a junction box is required;

3. The lighting fixtures do not come with cables when they leave the factory. If cables are required, please specify.

Wall mounted LED explosion-proof lightUsage and maintenance:

1. Before using explosion-proof lamps, it is necessary to carefully check whether the nameplate content matches the ordered product;

2. When installing the explosion-proof lamp, first connect the incoming cable to the wiring terminal of the wiring chamber through the introduction device, and press the sealing ring tightly to seal the cable, connect the grounding wire, tighten the screws, and after all the above checks are correct, it can be powered on for use;

3. Explosion proof lamps must not be disassembled at will. During maintenance, the power supply must be disconnected before opening the cover for inspection; This product generally does not require maintenance and has a long lifespan;

4. During the repair process, the explosion-proof surface must not be damaged. After repair, apply 204-1 anti rust oil, close the cover, and tighten it before use;

5. Explosion proof lamps should be regularly inspected and the dust on the surface of transparent parts should be cleaned;

Product Features:

The LED light source of the lamp adopts chips;

The shell is made of high-strength aluminum alloy die-casting, and after shot blasting, it is subjected to high-voltage electrostatic spraying;

After shot blasting and surface chemical treatment, the surface of the lamp housing is coated with high-voltage electrostatic spraying, which has strong corrosion resistance and a corrosion resistance level of up to WF2;

◆ A good sealing structure is set between each joint surface of the lamp, and the sealing ring is made of silicone rubber material, which is resistant to high temperature, aging, and the housing protection level can reach IP66;

The lighting fixtures are made of tempered glass, which has high temperature resistance and heat resistance to sudden changes;

The lamp is suitable for various installation methods such as ceiling mounted, wall mounted, bracket mounted, flange mounted, guardrail mounted, and street lamp mounted;

The lighting fixtures have high brightness, good shock resistance, beautiful and elegant appearance, and require no maintenance for long-term use. It is an ideal explosion-proof lighting fixture that is energy-saving and environmentally friendly.