- Phone
-
Address
Room 426, Block A, Building M8, No.1 Jiuxianqiao East Road, Chaoyang District, Beijing
Wigan Technology (Beijing) Co., Ltd
Room 426, Block A, Building M8, No.1 Jiuxianqiao East Road, Chaoyang District, Beijing
WIGGENS R-8SN rotary vane oil seal vacuum pump
Rotary vane oil seal vacuum pump is a commonly used traditional vacuum pump, which can be applied in many fields of vacuum technology, including scientific research and production. The rotary vane vacuum pump is a standard series vacuum pump specially launched by WIGGENS. This series of vacuum pumps can be used alone or as a front-end pump for other vacuum pumps such as molecular pumps, diffusion pumps, etc. Widely used in industries such as vacuum distillation, vacuum filtration, vacuum flaw detection, vacuum freeze-drying, vacuum coating, vacuum leak detection, vacuum packaging, vacuum adsorption, etc.
Characteristics of WIGGENS R-8SN rotary vane oil seal vacuum pump
*Compact structure, good sealing performance, no oil backflow after shutdown
*Anti fuel injection design
*Low noise, small size, easy to carry
*High flow rate, achieving stable vacuum in a short period of time
*Strong resistance to water vapor
*Compared to similar pumps, it has stronger resistance to chemical corrosion
*Can work consistently and stably, with a low maintenance rate
*Less oil mist is beneficial for optimizing the laboratory environment
*Circular oil level display window, well-designed for easier observation
*Equipped with gas chambers, it can extract a certain amount of condensable gases
*The motor is equipped with overload protection and a sealed motor (IP54)
Precautions for operating WIGGENS R-8SN rotary vane oil seal vacuum pump
*Before use, preheat the vacuum pump with the pump port closed to reduce condensation inside the pump
*Prevent particles from entering to protect mechanical components
*Cannot block the air outlet
*Use gas to blow condensed steam
*Using a cold trap to prevent corrosive steam from damaging the vacuum pump
*After use, close the air inlet and continue running the pump for a few minutes, while keeping the gas damper open to blow the solvent out of the pump
*Regularly inspect the quality of pump oil and maintain the pump
WIGGENS R-8SN rotary vane oil seal vacuum pumpTechnical parameters
model |
R-8SN |
Order Number |
900102-22 |
Vacuum degree (mbar) |
≥2.5 × 10-2 |
Extraction rate (L/min) |
≤120 |
Motor speed (RPM) |
1400 |
type |
Single-stage pump |
Inlet specifications* |
SAE 3/8' UNF 7/16' -20 |
| Vent specifications | DN25KF |
Fuel quantity (L) |
0.33 |
Weight (kg) |
11 |
| Noise (dB) (gas ballast) | <54 |
Power Specifications |
220-240V/50Hz |
Rated power (W) |
250 |
*168900-82/83/84 adapters can be selected according to needs