-
E-mail
shibo.yang@szhcj.cn
-
Phone
13671568405
-
Address
Room 301, Building 3, No. 1128 Changjiang South Road, Kunshan Development Zone, Jiangsu Province
Product Categories
Suzhou Huichangjin Electromechanical Equipment Co., Ltd
Vibration tester
NegotiableUpdate on 12/14
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Fluke FLUKE Vibration Tester $r $n Main Features $r $n Easy to set up $r $n Quickly create asset lists and work orders on your computer, use the Fluke Connect application on your smart device to set machine configuration files, and push routes to your 805 FC for on-site technicians to use. The consistent data quality of $r $n can be accurately and reliably measured in both high and low frequency ranges. Mobile data access stores the results in the cloud, allowing for remote data sharing with your team. Innovative sensor designs can address device tilt or contact pressure issues
Product Details
Product specifications:Fluke FLUKEVibration testerSeismometer
technical indicators
Low frequency range (direct frequency measurement)10 Hz to 1000 Hz
High frequency range (CF+measurement)4000 Hz to 20000 Hz
Severity levelGood, average, not meeting requirements, unacceptable
Vibration limit50 g peak (100 g maximum peak)
A/D conversion16 bits
signal-to-noise ratio80 dB
sampling rateLow frequency: 20000 Hz
High frequency: 80000 Hz
Real time clock backupButton cell
sensor
sensitivity100 mV g ± 10%
measurement range0.01 g to 50 g
Low frequency range (direct frequency measurement)10 Hz to 1000 Hz
High frequency range4000 Hz to 20000 Hz
resolution0.01 g
precisionWithin the range of 100 Hz ± 5% of the measured value
Amplitude unit
accelerationg, m/sec²
speedin/s, mm/s
displacementmils, mm
Infrared thermometer (temperature measurement)
range-20 ° C to 200 ° C (-4 ° F to 392 ° F)
precision±2 °C (4 °F)
focal lengthFixed, approximately 3.8 cm (1.5 ")
external sensor
Note: Fluke supports but does not provide external sensors
frequency range10 Hz to 1000 Hz
Bias voltage (to power supply)20 V to 22 V DC
Bias current (to power supply)5 mA maximum value
firmware
external interfaceUSB 2.0 (full speed) communication interface
data capacityDatabase on built-in flash memory
upgradeThrough USB socket
memoryMore than 3500 measurement results
radiation
Electrostatic discharge: burstStandard EN 61000-4-2
electromagnetic interferenceStandard EN 61000-4-3
radiationStandard CISPR 11 Level A
Environmental Requirements
Operating Temperature-20 ° C to 50 ° C (-4 ° F to 122 ° F)
storage temperature-30 ° C to 80 ° C (-22 ° F to 176 ° F)
Operating Humidity10% to 95% relative humidity (non condensing)
Operating/Storage Height3048 m (10000 ft) altitude
IP ratingIP54
Vibration limit500g peak value
drop test1-meter drop
General technical indicators
Battery TypeAA (2-cell) lithium iron disulfide battery
Battery life250 measurements
Dimensions (length x width x height)24.1 cm x 7.1 cm x 5.8 cm
(9.5 in x 2.8 in x 2.3 in)
weight0.40 kg (0.89 lb)
connectorUSB mini-B 7-pin, external sensor socket (SMB type connector)
Fluke 805 FC vibration point tester
include:
Fluke 805 FCVibration tester
USB cable
storage box
Belt type protective sheath
Quick Reference Guide
CD-ROM (including MS Excel template and manual)
Two (2) AA batteries
