Vehicle emergency lifting lighting device

Vehicle emergency lifting lighting device

I. Overview

Vehicle mounted lighting is a type of nighttime emergency lifting and lowering lighting device with vehicle mounted positioning.

The device can be controlled in two ways: wired control and wireless remote control. This system has reliable performance

Advantages such as easy operation and reasonable design.

This device is suitable for emergency lighting at night, with positioning function, and can be installed in cars or fixed systems

On the fixed platform, it can also be equipped with a pan tilt zoom camera and wireless transmission monitoring equipment, located on the roof and

The car forms an integrated lifting system, with a novel appearance and stable functions.

The car display screen equipped in the integrated car lighting display device is fully sealed and uses imported high brightness LED tubes. The display effect is the same within a 180 ° angle, solving the problem of small light emission angle of LED tubes

Scope of application:
Mobile command vehicle, information and communication vehicle, city vehicle, highway vehicle, highway checkpoint, various survey vehicles, etc

2、 Main technical parameters

3、 Connection reference diagram

The above picture is a reference picture. Please refer to the actual purchased product

Remote control instructions+control switch instructions

4、 Open box inspection

1. Open the box

1) Carefully open the packaging and remove all components; Install according to the instructions.

2) Check all possible transportation damages; If any damage occurs, please notify our company.

2. Packing List

1) 1 telescopic pole

2) 1 wireless controller

3) 1 wired control box

4) 1 set of lighting panel

5) 1 copy of user manual

6) 1 certificate of conformity

Note:

• Place the device on a rigid support plane and ensure it can withstand a weight of 50KG;

• Do not attempt to power on the device before inspection, as it may pose a danger to your personal safety;

• Check that there are no magnetic substances involved within a 500mm radius around the equipment;

• 5、 Installation

• 1) Set the control box and lamp post in a fixed position to avoid insufficient cable distance.

• 2) Drill holes in the bottom of the car according to the size of the equipment lamp post (choose the installation method as needed).

  3) After removing the flange of the equipment lamp post, place the lamp post down from the installation hole on the bottom of the vehicle into the fixed upper and lower flange plates

  4) Linking and fixing the lamp post to the lighting surface can be done forward or backward.

  5) Connect the light pole cable to the control box plug and tighten the plug screws.

  6) The control box is powered on and connected to AC 220V for power supply.

  7) After power on, all functions of the device can be operated using both wireless remote control and wired controller.Vehicle emergency lifting lighting deviceattention

• Only trained and qualified personnel are allowed to install, use, or maintain this equipment;

• Before connecting the power supply or operating this device, please make sure to install the lifting car mounted mobile lighting device

  There are no high-voltage wires within 10 meters of the square; If the equipment comes into contact with high voltage electricity, it may cause injury to personnel

  Death or equipment damage!!

  Do not place hands or objects in the telescopic position of the equipment, as it may cause injury to personnel;

  4. Do not let the naked eye face the light of the equipment fixture directly, as this may cause temporary blindness;

  Do not move the device while it is raised to avoid damage and danger!!!

  The following situations cannot provide free warranty service:

  Failure to follow the instructions resulted in malfunction and damage!

  Malfunctions caused by unauthorized personnel repairing without our company's permission!

  Without our company's permission, the customer made unauthorized modifications and caused malfunctions!

  Malfunctions caused by unstable and incorrect voltage of the equipment supplied by the customer!

Please consult us regarding online prices! Please consult us regarding online prices! Please consult us regarding online prices!