River Saint Mobile Lift Searchlight

Structural features:

River Saint Mobile Lift SearchlightComposed of two 1000W single ended dysprosium metal halide lamp heads, it can be equipped with floodlight or spotlight heads as needed; Can remotely control the lamp head to flip and illuminate in any direction according to on-site needs, with high brightness, strong penetration, and wide range.

I. Overview

Vehicle mounted lighting is a type of nighttime emergency lifting and lowering lighting device with vehicle mounted positioning.

The device can be controlled in two ways: wired control and wireless remote control. This system has the advantages of reliable performance, easy operation, and reasonable design.

thisRiver Saint Mobile Lift SearchlightSuitable for emergency lighting at night, with positioning function, can be installed on cars or fixed platforms, and can also be equipped with pan tilt cameras and wireless transmission monitoring equipment. It can be placed on the roof of the car to form an integrated lifting system, with a novel appearance and stable functions.

Fast startup: The COB light source chip is used to control the hot start trigger, which can light up the lamps at any time. After emergency lighting is connected to AC power, the entire equipment can be remotely or manually controlled to work. The control box has independent offline control; Configure storage box for easy storage and movement.

2、 Main technical parameters

3、 Connection reference diagram

1000W LED light fixture, roof movable lifting light, 360 degree rotating light, product parameters

The above picture is a reference picture. Please refer to the actual purchased product

Remote control instructions+control switch instructions

4、 Open box inspection

1. Open the box

1) Carefully open the packaging and remove all components; Install according to the instructions.

2) Check all possible transportation damages; If any damage occurs, please notify our company.

2. Packing List

1) 1 telescopic pole

2) 1 wireless controller

3) 1 wired control box

4) 1 set of lighting panel

5) 1 copy of user manual

6) 1 certificate of conformity

Note:

When moving equipment, the lamp post should be moved, but do not pull the lamp or lamp post forcefully to prevent damage to the components of the lamp transmission box or lamp post;

Place the device on a rigid support plane and ensure it can withstand a weight of 50KG;

Do not attempt to power on the device before inspection, as it may pose a danger to your personal safety;

Check that there are no magnetic substances involved within a 500mm radius around the equipment;

5、 Installation

1) Set the control box and lamp post in a fixed position to avoid insufficient cable distance.

2) Drill holes in the bottom of the car according to the size of the equipment lamp post (choose the installation method as needed).

3) After removing the flange of the equipment lamp post, place the lamp post down from the installation hole on the bottom of the vehicle into the fixed upper and lower flange plates

4) Linking and fixing the lamp post to the lighting surface can be done forward or backward.

5) Connect the light pole cable to the control box plug and tighten the plug screws.

6) The control box is powered on and connected to AC 220V for power supply.

7) After power on, all functions of the device can be operated using both wireless remote control and wired controller.

Note:

Only trained and qualified personnel are allowed to install, use, or maintain this equipment;

Before connecting the power supply or operating this device, please make sure to install the lifting car mounted mobile lighting device

There are no high-voltage wires within 10 meters of the square; If the equipment comes into contact with high voltage electricity, it may cause personal injury, death, or equipment damage!!

Do not place hands or objects in the telescopic position of the equipment, as it may cause injury to personnel;

4. Do not let the naked eye face the light of the equipment fixture directly, as this may cause temporary blindness;

Do not move the device while it is raised to avoid damage and danger!!!

The following situations cannot provide free warranty service:

Failure to follow the instructions resulted in malfunction and damage!

Malfunctions caused by unauthorized personnel repairing without our company's permission!

Without our company's permission, the customer made unauthorized modifications and caused malfunctions!

Malfunctions caused by unstable and incorrect voltage of the equipment supplied by the customer!

Please consult us regarding online prices! Please consult us regarding online prices! Please consult us regarding online prices!