Ultrasonic thickness gauge PM5 Gen2

Ultrasonic thickness gaugePM5 Gen2

Ultrasonic thickness gauge PM5 Gen2It is an advanced ultrasonic thickness gauge innovatively developed with multiple standard measurement functions and functional options. This portable thickness gauge uses different frequencies and types of single crystal probes to meet most measurement needs. And the measurement range is wide, with thickness ranging from0.15mmThin steel plates, steel bars several tens of meters long, and even thin paint layers several tens of micrometers can all be measured. Fully functionalPM5 Gen2It is an innovative measuring instrument that integrates multiple solutions and can be effectively applied to most thickness measurement applications.

Ultrasonic thickness gauge PM5 Gen2It can be applied to testing fields such as manufacturing, metal processing industry, aerospace, railway transportation, chemical industry, and commercial inspection industry. In addition to accurately measuring various types of plates and processed parts, it can also monitor various pipelines and pressure vessels in production equipment, monitoring their degree of thinning after corrosion during use. It is a testing instrument in the non-destructive testing industry.

Ultrasonic thickness gauge PM5 Gen2Can be used in combination with delay line probes, contact probes, protective film probes, pen probes, water immersion probes, and high-temperature probes, with a probe frequency range of0.5-20MHzAccording to the requirements, probes and measuring fixtures can be customized to meet various measurement needs.

PM5 Gen2Main technical parameters

Display screen: 2.4-inch (320 × 240 dot matrix) TFT color display LCD screen

Measurement principle:P-E (pulse-echo method)TheI-E (Interface wave echo method)TheE-E (Echo method)TheI-ME (Multiple echo method)TheE-EV(Echo verification method)

Probe type:Support delay line probes, contact probes, protective film probes, and pen probes

Calibration method:Zero calibration probe, calibrated sound speed, one point calibration, two-point calibration, set sound speed

thickness range

0.01Millimeters~38Meter, depending on the tested material, probe surface conditions, temperature, and selected configuration

0.15mm～30mm(Standard configuration)D15AProbe, steel)

Indication error:±0.01 H≤3mm

±0.05 3＜H＜10mm

±(0.5%H+0.01) H≥10mm

HTo measure the thickness of the material being tested

Material sound speed range: 310-18699m/s, and can be used to measure the sound speed of objects with known thickness

Resolution: 0.1/0.01/0.001 millimeters selectable

Probe frequency range: 0.5MHz to 20 MHz

Working language: Chinese and English are optional

Measurement unit:millimeter,Inches, micrometers, and mils

Measurement update rate: 4HZ, 8HZ, 16HZ optional per second

Instrument shutdown: optional automatic shutdown after 5, 10, 20 minutes of inactivity, or manual shutdown

Working temperature: -10 ℃~50 ℃

Storage temperature: -20 ℃~70 ℃

Relative humidity: 20% RH to 90% RH

Dimensions: 153mm × 76mm × 37mm (H × W × D)

Weight: 280g including battery

Working power supply: Two AA batteries, standby time greater than 24 hours

Display screen: 2.4-inch (320 × 240 dot matrix) TFT color display LCD screen

Rectification mode:RF, Inverted RF, Full Wave, Positive Half Wave, Negative Half Wave

View Mode：AScanBScanning, numerical value, maximum value capture, difference, and over limit alarm

Instrument casing: impact resistant, waterproof, and equipped with sealing gaskets, with sealed interfaces on the casing. Designed to comply with IP67 standards.

Storage options: can store 100000 thickness values and 400 parameter configuration files (optional)

Standard Configuration

Ultrasonic thickness gaugePM5 Gen2Ultrasonic thickness gaugePM5 Gen2