- Phone
-
Address
Room 135, North Building, No.1 Guanzhuang Dongli, Chaoyang District, Beijing
Product Categories
Beijing Guohuan High tech Automation Technology Research Institute
Ultrasonic cleaning machine
NegotiableUpdate on 07/07
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Principle knowledge of ultrasonic cleaning machine: $r $n #160; #160; #160; Mainly through a transducer, the sound energy of the power ultrasonic frequency source is converted into mechanical vibration, and the ultrasonic waves are radiated into the cleaning solution in the tank through the cleaning tank wall. Due to the radiation of ultrasonic waves, microbubbles in the liquid inside the tank can maintain vibration under the action of sound waves. Disrupting the adsorption of dirt and cleaning surfaces, causing fatigue damage to the dirt layer and detachment, and the vibration of gas bubbles scrubbing the solid surface.
Product Details
GH-22LUltrasonic cleaning machine
Ultrasonic cleaning machinePrinciple knowledge:
Mainly through a transducer, the sound energy of the power ultrasonic frequency source is converted into mechanical vibration, and the ultrasonic waves are radiated into the cleaning solution in the tank through the cleaning tank wall. Due to the radiation of ultrasonic waves, microbubbles in the liquid inside the tank can maintain vibration under the action of sound waves. Disrupting the adsorption of dirt and cleaning surfaces, causing fatigue damage to the dirt layer and detachment, and the vibration of gas bubbles scrubbing the solid surface.
Technical parameters：
Model: GH-22L
Inner container size: 500 x 300 x 150 mm
Dimensions: 530x 330x 340 mm
Ultrasonic power: 480W (adjustable from 10% to 100% power)
Heating power: 500W (room temperature -60 degrees)
Time control: 1-99 minutes
Capacity: 22L
Gross weight: 16KG
Features: Adjustable time, adjustable temperature, adjustable ultrasound power, adjustable frequency, digital countdown display, real-time display of current temperature and time. LCD display
Frequency40KHz
Temperature range: room temperature-80℃
Ultrasonic cleaning machineFeature Highlights:
1. Clean with regular tap water;
2. Can be heated by heating;
3. Good cleaning effect;
4. Digital LCD can adjust temperature and usage time;
5. All stainless steel shell, lid, and inner liner.
Ultrasonic cleaning machineCleaning operation process:
1. Add tap water to the cleaning tank, ensuring that the water level is higher than or equal to 3/4 of the tank height. Start electric heating and ultrasound for degassing. When the water temperature is around 40 degrees, add the specified amount of ultrasound specific cleaning agent. When the water temperature reaches 55-60 degrees, start cleaning the parts.
2. Disassemble the parts that need to be cleaned as much as possible, and use high-pressure water guns, wire brushes, shovels, or other tools to manually assist in pre-treatment of the soil, heavy oil stains, and heavy carbon deposits on the surface of the parts to ensure the service life of the cleaning solution and the speed and effectiveness of cleaning.
3. Place the parts that need to be cleaned into the cleaning pool, without overlapping, to ensure that all parts are submerged in the cleaning solution.
4. Start the ultrasonic wave and clean it regularly for 20-30 minutes. After cleaning, turn off the ultrasonic wave and remove the parts for post-processing.
5. Use a high-pressure water gun to remove residues on the surface of the components, and use an air compression gun to remove residues inside the holes. Parts that require rust prevention should be treated separately. To improve the cleaning effect, the cleaning time of the components in the cleaning solution can be appropriately extended if time permits. In practical operation, to improve cleaning efficiency, a process flow of disassembly and cleaning can be adopted.
