UT39A+digital multimeter

NegotiableUpdate on 05/19

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Shanghai Wangxu Electric provides: UT39A+digital multimeter - usage method of lightning protection detection instrument

Product Details

brand	Self operated brand	Origin category	domestic
application field	Chemical, petroleum, mining, electronics, transportation

UT39A+<strong>数字万用表_防雷检测<span class=

List of professional equipment for lightning protection device detection - Shanghai Xuji Electric

serial number	Instrument and equipment name	Main performance requirements	model
1	Laser rangefinder	Range: 0-150m	SW-150
2	thickness gauge	Metal thickness measurement, ultrasonic	GM100
3	theodolite	Range: 0-360 °, Resolution: 2 ″	DJD2-J
4	tension meter	Range: 0-40kgf	NK-500
5	Combustible gas tester	Applicable gas: Combustible gas	BH-90
6	Grounding resistance tester	Test current:>20mA (sine wave), resolution: 0.01 Ω	SG3010
7	Earth Network Tester	Test current:>3A, resolution: 0.001-99.999 Ω, frequency optional	SGDW-5A
8	Soil resistivity tester	Four wire method measurement, test current:>20mA (sine wave) resolution: 0.01 Ω	SG3010E
9	Equipotential tester	Test current: ≥ 1A, four wire method test, resolution: 0.001 Ω, equipped with large capacity lithium battery	SG3050
10	Loop resistance tester	Resistance measurement resolution: 0.001 Ω, current measurement resolution: 1uA	CA6416
11	Lightning protection component tester	Test device: MOV, equipped with high-capacity lithium battery	SHSG9200A
12	Insulation resistance tester	0-1000MΩ	VC60B+
13	Surface impedance tester	Measurement range: 103-1010 Ω	GM3110
14	Electrostatic potential tester	Measurement range: ± 20kv	EST101
15	Digital Multimeter	Voltage, current, and resistance measurements, resolution: 3 and a half digits	UT39A+
16	Explosion proof intercom (yes)	Explosion proof intercom	GP328
17	standard resistor	10-3-105 ohms, power 1/2w, wire wound type	SHSG90
18	steel tape measure	Resolution: 0.01m 50 meters
19	vernier caliper	Range: 0-150mm

Shanghai Xuji Electric provides: UT39A+digital multimeter - usage method of lightning protection detection instrument

The usage of the digital multimeter lightning protection detection instrument is the same as other digital multimeters. Insert the black probe into the COM port, and the red probe into the V port when measuring voltage, resistance, and diode PN junction. Then turn the dial to the corresponding range for measurement. If measuring current, the red probe should be inserted into the uAmA port (for small currents not exceeding 200mA) or A port (for large currents not exceeding 10A and the measurement time should not be too long), and the dial should be turned to the corresponding range for measurement. For other transistor measurements, turn the dial to the hFE position and insert the transistor pin into the corresponding NPN or PNP hole next to the hFE position. Of course, the transistor can also be measured by measuring the quality of two PN junctions separately. When measuring capacitance, turn the dial to the F position and insert the two pins of the measured capacitance into the two holes of ┤동. This meter should only be able to measure capacitance below 2uF.