List of Lightning Protection Testing Instruments Lightning Protection Grounding Resistance Tester

List of Lightning Protection Testing Instruments - Lightning Protection Grounding Resistance Tester

In order to strengthen the qualification management of lightning protection device (hereinafter referred to as lightning protection device) testing, standardize the behavior of lightning protection device testing, protect people's lives, property and public safety, and in accordance with laws and regulations such as the Meteorological Law of the People's Republic of China and the Regulations on the Prevention of Meteorological Disasters, the "Measures for the Qualification Management of Lightning Protection Device Testing" are formulated.

According to the "Management Measures for the Qualification of Lightning Protection Device Testing", units applying for lightning protection device testing qualifications shall meet the following basic conditions:
The instruments and equipment used for lightning protection device detection shall be verified or calibrated by a statutory metrological verification institution and within their validity period.

Lightning protection grounding resistance tester provided by Shanghai Xuji Electric Co., Ltd

1. Laser rangefinder: Range: 0-150m

2. Thickness gauge: Metal thickness measurement, ultrasonic

3. Theodolite: Range: 0-360 °, Resolution: 2 ″

4. Tensile strength gauge: Range: 0-40kgf

5. Combustible gas tester: Applicable gas: Combustible gas

6. Grounding resistance tester: Test current:>20mA (sine wave), resolution: 0.01 Ω

7. Earth Network Tester: Test current:>3A, resolution: 0.001-99.999 Ω, frequency optional

8. Soil resistivity tester: four wire method measurement, test current:>20mA (sine wave), resolution: 0.01 Ω

9. Equipotential tester: Test current: ≥ 1A, four wire method test, resolution: 0.001 Ω, equipped with large capacity lithium battery

10. Loop resistance tester: Resistance measurement resolution: 0.001 Ω, current measurement resolution: 1 μ A

11. Lightning protection component tester: Testing device: MOV, equipped with large capacity lithium battery

12. Insulation resistance tester: 0-1000M Ω

13. Surface impedance tester: Measurement range: 103-1010 Ω

14. Electrostatic potential tester: Measurement range: ± 20kv

15. Digital multimeter: voltage, current, resistance measurement, resolution: 3 and a half digits

16. Explosion proof intercom; Explosion proof intercom

17. Standard resistance: 10-3-105 ohms, power 1/2w, wire wound type

18. Steel tape measure: Resolution: 0.01m

19. Vernier caliper: Range: 0-150mm