Two stage pneumatic slicer

NegotiableUpdate on 02/10

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The two-stage pneumatic slicer is used for cutting test pieces of various materials such as paper, rubber, plastic, leather, etc. The machine is divided into two stroke modes: a. One stroke is used for cutting Mooney and tensile machine samples (requires Mooney and tensile machine cutters). b. Two stroke is used for cutting rheometer samples, equipped with a dedicated sulfur transformation sample cutter, which can cut equal volumes of samples (the same rubber material).

Product Details

Two stage pneumatic slicerThis machine is used for cutting test pieces of various materials such as paper, rubber, plastic, leather, etc. It is divided into two stroke modes: a. One stroke is for cutting Mooney and tensile machine samples (requires Mooney and tensile machine cutters). b. Two stroke is for cutting rheometer samples, equipped with a dedicated sulfur transformation test material cutter, which can cut equal volumes of samples (the same rubber material).

Two stage pneumatic slicer：

1. Air pressure standard: 4.5 kg/cm2 (buyer's own air compressor)

2. Maximum air pressure: 10 kilograms per square centimeter

3. Power supply: 3 ∧, AC380V, 50HZ three-phase five wire

4. Volume: 390 X420 X835 (W × D × H) mm

5. Weight: Approximately 110kg