Two impact boxes

NegotiableUpdate on 07/01

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The two box impact chamber is used to test the endurance of components under rapid temperature changes. The two box cold and hot impact test chamber is suitable for quality control laboratories and can meet the screening of commercial products in the production process. The thermal storage cold and hot impact chamber does not require the use of liquid gas LN2 or LCO2 to assist in cooling the test object. The static testing method is currently widely used in electronic component testing research and semiconductor production lines, which can save a lot of consumables testing costs and operate quickly.

Product Details

Main technical parameters

1. Product Model:TS50

2. Temperature range:A－20℃～200℃ 、B-40℃～200℃ 、C-60℃～200℃

3. Preheating temperature range: normal temperature~+115℃

4. Pre cooling range: from room temperature to -55℃

5. Temperature deviation:±2℃

6. Temperature fluctuations: both high and low temperature chambers≤±2℃

7. Heating rate:≥2℃/min

8. 降温速率：≥1.5℃/min

9. Temperature fluctuations in the sample area:At a constant temperature of ≤± 0.5 ℃

10. Temperature recovery time: approximately≤ 5 minutes, conversion time ≤ 15S

Note: The above performance indicators are at room temperature+The value measured under the condition of no sample at 25 ℃.

Security protection system

1. Equipped with a non fuse protection switch (with leakage protection);

2. The control system has phase sequence protection and overvoltage/undervoltage current protection;

3. Overtemperature protection switch;

4. Overload protection device for refrigeration compressor;

5. Compressor high and low pressure protection switch;

6Each fan motor and air duct gate motor are equipped with overload protection;