Product Introduction
BTG-ATube opacity testerCan be used to determine the opacity of plastic pipes and fittings, and the results are displayed in percentage form. The measuring instrument is fully automated, with four samples tested each time,12Automatic identification, positioning, tracking, and mobile testing of three measurement points per sample.
Execution standards
GBT21300-2007Determination of opacity of plastic pipes and fittings,ISO7686:2005, IDT
Performance characteristics
1. Fully automatic operation, convenient and fast.
2. High measurement accuracy and stable performance.
3. Power on for testing, no preheating required.
4. Automatic replacement of gratings, easy to operate: Five gratings are built into the machine, and as long as the specifications of the sample are selected, the control system will automatically move the gratings to the north side of the sample.
5. Wide measurement range, capable of measuringDN16mm，DN20mm，DN25mm，DN32mm，DN40mmFive sizes of pipes.
6. It can measure four samples and twelve measurement points simultaneously, eliminating the tedious operation of replacing samples.
7. The speed of entering and exiting the warehouse is fast. The measuring instrument adopts a ball screw drive method, which not only greatly improves the speed of entering and exiting the warehouse, but also reduces the inertia caused by longitudinal movement, thereby reducing measurement errors.
8. Short experimental time, a complete experiment only requires10minute.
Equipment parameters
1. Pipe diameter range:Φ16～Φ40Divided into five levels16、20、25、32、40
2. Sample length:80mm
3. Number of samples:4
4. Sample rack:5One, can automatically locate
5. Automatic sample positioning accuracy:±0.1mm
6. Duration of each experiment: approximately10minute
7. Grating:16，20，25，32，40common5individual
8. Light source:LEDEnergy saving standard light source, generated through a light pipe546nm±3nmlight
9. Grating tracking and positioning: automatic and corresponding to the sample
10. Warehouse Entry and Exit: Automatic
11. Drive mode: motor+Ball screw
12. Entry and exit speed:200mm/min
13. Moving distance for warehouse entry and exit:170mm±1mm
14. Automatic sample tracking speed:200mm/min
15. Microcomputer controlled (touch screen) automatic analysis, recording, and display
