Pipe constant temperature water tank

The water tank of the static hydraulic testing machine is suitable for long-term static hydraulic testing of various plastic pipes, hydraulic instantaneous burst testing of pipes, and determination of the damage resistance time of thermoplastic pipes under long-term constant pressure resistance. It is an essential testing equipment for various research institutes, quality inspection departments, and pipe manufacturers.
1. The insulation system adopts an inner liner for overall insulation, using two types of insulation materials with good insulation performance and significant energy-saving benefits for long-term use. When the water temperature is 95 ℃, the outer box is still close to room temperature, greatly improving the safety of the whole machine, and saving more than 70% of power consumption;
2. The pipeline adopts a circulating spray system, and the overall pipeline system material is 304 stainless steel,
3. External (or internal) heaters have high heat exchange efficiency, and maintenance, repair, and upkeep of the heater do not require shutdown and do not affect the normal operation of the test;
4. Cooling power 1-5 horsepower;
5. The refrigeration device is external or internal, which has no impact on the laboratory temperature and no noise during summer;
6. The opening method of the box cover is pneumatic, and it should meet the laboratory space requirements after opening;
7. The opening angle (size) of the box cover can be stopped at any time, and it has reliability, safety, and convenience;
8. The box cover is sealed with silicone rubber strips, ensuring no gas leakage at high temperatures;
9. Equipped with intelligent automatic water replenishment function, water shortage shutdown protection function, and overflow function; The temperature can be freely set and controlled by oneself;
10. The bottom of the structural frame box has a large load-bearing capacity and strong resistance to deformation;
11. Stainless steel inner liner, equipped with a stainless steel pump body structure frame box bottom, with high load-bearing capacity and strong deformation resistance.
12. The inner liner is made of 2mm thick stainless steel plate.
13. An insulation layer with a thickness of over 85mm and measures to reduce thermal bridges (short circuits) for insulation and energy saving.
14. All components are made of stainless steel (pipes, fittings, heaters, valves, etc.).
15. Imported circulating pump with a large water tank circulation capacity of 135 L/min (rated).
16. The temperature control system adopts branded leakage protection devices to timely protect human safety.
17. The constant temperature water tank can circulate automatically or be connected to an external circulation system.
18. The water tank comes with a heating control system, and the pressure input port is determined by the user (such as 10 interfaces).
19. Equipped with a refrigeration system (temperature can be lowered from room temperature to 5 ℃) and a high-power industrial compressor refrigeration system.
20. Equipped with an automatic water replenishment device, the water tank will automatically add water to the tank when the water level is below the set value.
21. The water tank also has an automatic filtering function, which can filter out impurities in the water at any time.
22. The inner wall of the water tank is equipped with a high-pressure interface, and each interface is equipped with a high-pressure hose.
23. The water tank adopts a spray type structure, with a circulating pump extracting hot water from the bottom and spraying it down from the top. This cycle keeps the temperature balance of the water tank constant.
24. The temperature control system adopts a self-developed microprocessor with RS232 interface to communicate with the computer in real time and transmit the temperature for display on the computer interface.