Tooth module staining instrument, staining device, tooth dyeing machine, brushing and grinding instrument

Product Name: Dental Module Staining Instrument

Product Model:JR-2

Tooth module staining instrument, staining device, tooth dyeing machine, brushing and grinding instrument

Introduction to dental module staining instrument:

Dental moduleStainer: equipped with a rotating wheel connected to an electric motor, a carrier capable of accommodating dental grinding blocks on the rotating wheel, a water tank of a certain capacity below the rotating wheel, and a rotating speed greater than or equal to2r/minAfter staining the dental module, it is necessary to use a brush grinder for brushing and grindingThe pressure value can be adjusted separately and tested in real-time through experimental monitoring, greatly improving the accuracy and reliability of testing. All toothbrushes use8Independent pressure sensors, each independent module can measure and calibrate, eliminating pressure unevenness caused by mechanical manufacturing, workpiece installation, tooth module preparation and processing, etc,Adjustable brushing load and frequency, controllable brushing load(precision0.1g).

The dental module staining instrument is based onT/COCIA7-2020，GB/T43576-2023Laboratory evaluation of toothpaste efficacy in removing exogenous pigmentation,GB/T35832-2018The method for detecting the friction value of toothpaste requires design and development.

The dental module staining instrument adopts a constant temperature and sealed air source chamber, simulating the characteristics of uniform human oral cavity. The temperature control is precise and stable, ensuring uniform temperature while avoiding temperature overshoot and large fluctuations. The servo motor can rotate continuously for a long time. adopt12The high magnetic level magnetic block is used to fix the tooth base on the base, which is convenient and easy, without damaging the tooth base due to external forces such as running during rotation or friction from the fixture. The same batch of teeth can be dyed with no less than100A dental module ensures the uniformity and consistency of teeth dyed in the same car to a large extent without damaging the surface of the dental base, shortening the staining time of the dental module and improving the efficiency of high batch experiments.

The dental module staining instrument has a beautiful and elegant appearance, a reasonable structure, simple operation, durability, and good repeatability,The cavity adopts304High quality stainless steel, easy to clean and disassemble after dyeing. The software has rich content, clear interface, and simple operation. The motor control adopts servo motor closed-loop control, with precise speed and stable operation.

Tooth module staining instrument, staining device, tooth dyeing machine, brushing and grinding instrument

Dental module staining instrumentApplicable standards:GB/T40002-2021TheISO11609TheT/COCIA7-2020TheISO28399TheGB/T43576-2023TheYY/T1829-2022TheGB/T35832-2018Wait.

Main technical parameters of dental module staining instrument:

1Magnetic base:12bit

2Number of dental module installations: ≥110piece

3Working power supply:220V AC，50/60HZ

4Equipment power:650W

5Heating power:150W

6Temperature control range: from room temperature to50℃ adjustable

7Temperature accuracy:37℃±1℃

8Wheel speed: 1-60r/min ± 1%, can be calibrated and measured

9Lighting method:LEDfluorescent tube

10Working hours:0.5-4500minConfigurable

11Display screen size:5Inch LCD screen

Note: Our company produces and sells dental module brushing and grinding equipment, dental module staining equipment, various specifications of dental modules, and dentin slices. If you need them, please contact our sales personnel for consultation!