Tianjin New Energy Vehicle Walk in Aging Room

Tianjin New Energy Vehicle Walk in Aging RoomIt is an important equipment for high-temperature and harsh environmental testing of automotive electronic products.

Main function: Improve the stability and reliability of automotive electronic products, conduct accelerated aging tests on automotive electronic products by simulating harsh environments such as high temperatures, to evaluate their performance changes within the specified life cycle.

Application areas: Widely used in the research and production process of automotive electronic products, such as automotive electronic products, power supplies, motherboards, etc.

Equipment features: The outer frame structure is composed of double-sided color steel insulation panels, and the size can be customized according to customer requirements. It is equipped with components such as a box, control system, air circulation system, heating system, etc., to ensure the accuracy and stability of testing.

Advantage: Through aging testing, potential problems with automotive electronic products can be detected in advance, providing customers with effective means to quickly identify and solve problems, which helps improve product quality and production efficiency.

Introduction to Aging Room Control:

A: Control system:

Temperature controller: 7-inch backlit display touch PLC programmable controller,

Resolution: 800x48065535 true color.

B: Controller specifications:

Resolution: Temperature ± 0.01

Temperature slope: adjustable from 0.1 to 9.9

Equipped with upper and lower limit standby and alarm functions

Temperature input force signal PT100

C: Screen display function:

Direct display of temperature setting (SV) and actual (PV) values

Can display the current program execution number, segment number, remaining time, and number of cycles

Accumulated operation time function

Has a separate program editing screen.

The screen display protection function can be set to timer, TIMER, or manually turned off

D: Program capacity and control functions:

Available program groups: up to 100 groups, 10000 segments

Repeatable command execution, with each command capable of up to 32000 cycles.

Fixed time setting 0~999999Hour59Min (can also be set without time limit)

Equipped with R485 communication interface and free testing software

An open communication protocol that can be embedded into user device systems for unified data management, testing, and more

It has a historical data storage of about 600 days, with a recording interval of about 1 minute. The larger the recording interval, the longer the storage time.

USB 2.0 interface test data export function.

USB storage, can be plugged into a USB drive to download historical curves, historical data, etc

It has real-time display of graphical curves

Equipped with temperature correction function

It has the function of scheduled startup and shutdown

It has a temporary experimental function.

It has power outage memory function, power-off program memory, and automatically starts and continues to execute program functions after power restoration

Has date and time adjustment function

Laboratory structure:

1. Warehouse board: The room is assembled with 75mm rock wool board, with a 0.6mm thick milky white color steel plate on the outside and a 0.6mm thick milky white color steel plate on the inside. modularization

Combination, easy to install and disassemble. Five or six sided insulation, with PVC protective film covering the board surface to prevent scratches, stains, and damage. The appearance is beautiful and elegant

2. Test door: Double or single open

3. There is a safety latch on the inside of the equipment door, which is equipped with a safety device that can be opened from the inside out.

4. There are two 40cm x 50cm (width * height) glass observation windows installed on the door.

5. Test the use of high and low temperature resistant sealing strips for the door and room body

6. Air supply circulation system: a. Circulation motor: AC380V)

b. Extended axis

c. Fan: Steel fan blades

Stainless steel air ducts are installed on the left and right exterior walls of the laboratory, with 2 air louvers installed on each duct. The air direction can be adjusted from left to right.

Exhaust system: An axial flow fan is installed at the top of the laboratory, equipped with a 150mm diameter exhaust outlet. It can be automatically or manually turned on when the laboratory exceeds the temperature limit.

Inlet system: Install a 200mm inlet louver balance port on the bottom side of the laboratory

Heating device: Stainless steel finned heating tube, easy to install, maintain and replace.

Convection system:

Multi blade turbofan, high-temperature resistant fan. Accelerate the temperature balance time in the studio and improve the uniformity of indoor temperature.

There is a sensor alarm device installed in the air duct, which will emit an alarm signal and automatically cut off the power supply when the temperature of the inner wall of the air duct is too high or the circulating fan overheats.

Safety protection device:

Power overload and short circuit protection.

Box grounding protection: The inner wall of the box is connected as a whole and connected to the external ground.

Overtemperature protection: In order to prevent damage to the sample due to high temperature inside the box, when the actual temperature exceeds the set value, the power will be automatically cut off and an alarm prompt will be generated,

Thus achieving the purpose of protecting the sample.

Power phase loss alarm: prevents the power supply from causing unbalanced current in each phase due to phase loss, which affects the heating effect.

Modular wiring terminals.

Alarm sound prompt: Equipped with sound and light alarm prompt device, it will promptly emit sound and light prompts when an alarm is generated.

Set the time to stop the device and issue an alarm (sound and light alarm)

Tianjin New Energy Vehicle Walk in Aging RoomTechnical Specifications: