Thermal oil electric heater

Thermal oil electric heater

The heat transfer oil electric heater heats up the heat transfer oil through electricity, and then transports the high-temperature heat transfer oil to the equipment or product that needs to be heated through a high-temperature circulation pump, transferring the heat energy to the equipment or product that needs to be heated. After unloading the heat energy, it returns to the heating device for heating, and the cycle repeats until the temperature remains stable

Features:

1Pipeline riot control device

2Blowing air to return oil function

3Return oil temperature display table

4Automatic exhaust function of the machine

5Heating power switching function

6、 RS485 communication function for automated management

7Isolated electrical control box, extending the service life of electrical appliances

8Hot oil BY-PASS pressure relief circuit

9Multi point temperature control units can be customized

10Oil pump horsepower and heating power can be customized

11The electrical appliances are OMRON.FUJI.TE.LG.MOELLER.ABB-WEST

12Temperature control range; Inlet water temperature+25 ℃ → 300 ℃

13Control method: Adopting imported microcomputer or (optional) PLC control

14Safety protection *, fault display, repair, maintenance do not require professional personnel

Advantages:

1At a lower working pressure (<0.5MPa=higher working temperature (≤ 350 ℃), the operating pressure is only one seventieth of the saturated vapor pressure of water when the heating temperature is 350 ℃

2High thermal efficiency (>95%)

3It can achieve stable and uniform heating And it can achieve precise temperature control (temperature control accuracy can be within ± 1 ℃ range)

4It has a complete control system and safety monitoring device

5The heat transfer medium of the heating system is organic heat carrier - thermal oil, which is odorless, non-toxic, environmentally friendly, has no impact on the health of operators, corrodes equipment, and has a long service life

6It can be installed horizontally near hot users (using hot equipment or hot environments)

Maintenance standards:

1If you have purchased a new one, please check if the heat transfer oil is flowing before use to prevent damage to the oil circulation mold temperature machine due to insufficient heat transfer oil We need to keep the working environment of the oil circulation mold temperature machine clean and avoid dust, which can greatly extend the service life of the electrical appliances of the oil circulation mold temperature machine

2According to the operating temperature, regularly replace the heat transfer oil. For temperatures above 200 ℃, we need to replace it every six months, while for temperatures below 200 ℃, we can replace it about once a year. This effectively avoids the problem of temperature not being able to increase

3In terms of pipelines, we need to determine whether there is any blockage based on the relationship between the pump and pressure. If the pressure is too low, we can remove the heating tube and clean it with tools, especially the filter mesh cover at the system inlet, which should be cleaned once a month

4Regularly check whether the oil pump leaks oil, and if necessary, replace the pump shaft seal regularly

5On electrical components, we can replace them according to their service life and conduct regular testing to ensure safety

The electric heater is directly inserted into the organic carrier (heat transfer oil) for direct heating, and the heated heat transfer oil is transported to the heating equipment through a high-temperature oil pump for forced liquid-phase circulation, and then returned to the heating device through the oil outlet of the heating equipment, forming a complete circulating heating system

Article source: http://www.lsj2 .. ｃｏｍ